PDA

View Full Version : AA Tuning Twinscrew kit on 332ti

jon@theMshop
07-24-2006, 12:54 AM
Hopefully this will be the first 332ti with a twinscrew kit in North America. The Schrick Cams are being removed and the engine has Supersprint Headers, Magnaflow Resonators, Supersprint Exhaust, UUC 8.5lbs flywheel and E34 M5 clutch kit.

Picture of the twinscrew kit assembly
jon@theMshop
07-24-2006, 12:55 AM
To the first designer of the BMW E36 twinscrew kit
mischief
07-24-2006, 03:21 AM
i want a twinscrew
HuGo
07-24-2006, 04:06 AM
joe is gonna supercharge his TI? That car is gonna pull sick. Its gonna have about 300 horses isnt it?
jon@theMshop
08-06-2006, 09:48 PM
Well.. the 332ti Twin Screw Supercharger kit is completed. Here are pictures from Saturday with a partial installation setup.

I will take more pictures tomorrow when we go out to do a test drive and photo shoot.
SporTi
08-06-2006, 09:51 PM
Nice tight install.
HuGo
08-07-2006, 06:10 AM
I will stop sometime this week and check it out. Hopefully joe would take me for a spin again :biggrin:
jon@theMshop
08-07-2006, 09:45 PM
OK I thought the car was done but it's like 90% completed. The front bumper and drivers side headlight has to be installed. The owner, Joe, changed the engine oil this morning.

He was driving around the block with no front bumper and the twinscrew whine was hella loud. It was sweet. He broke the tires loose on 2nd gear too.

If there is time we're going to route the throttle body cable and the hose coming out from the top of the valve cover.
jon@theMshop
08-07-2006, 09:46 PM
More Pics!
Kraln
08-07-2006, 11:30 PM
how much $ didya drop on that bimmer? :)
jon@theMshop
08-07-2006, 11:34 PM
how much $ didya drop on that bimmer? :)

The 332ti is not mine. This is what I know...

The owner had a 318ti and bought a wrecked 98 M3 that was rolled over. He installed the engine and transmission. The owner is a BMW technician and shop manager so labor was cheap... except for his time.

We're a dealer for AA Tuning so we bought the twinscrew kit from them.
HuGo
08-08-2006, 01:33 AM
how many horses will Joe be pushing, 300?
jon@theMshop
08-08-2006, 01:52 AM
how many horses will Joe be pushing, 300?

AA advertises it as 415hp at the crank. We think it's more because he has Supersprint headers, magnaflow resonator (No Cats) and a supersprint rear exhaust.
HuGo
08-08-2006, 01:54 AM
AA advertises it as 415hp at the crank. We think it's more because he has Supersprint headers, magnaflow resonator (No Cats) and a supersprint rear exhaust.

so he went from 240 HP (stock s52 horsepower) all the way up to 415?? Jesus.
1996 328ti
08-08-2006, 02:05 AM
We're a dealer for AA Tuning so we bought the twinscrew kit from them.We have a M Coupe in our area with a twin screw. Software from Eurosport. http://www.mdorphin.com/
jon@theMshop
08-08-2006, 02:13 AM
so he went from 240 HP (stock s52 horsepower) all the way up to 415?? Jesus.

Actually, before he installed the twin screw kit he had the Eurosport OBD2 Cam Kit setup.

The car is just sick because he also has 3.73 gears!
HuGo
08-09-2006, 05:23 AM
all i got to say is that engine looked very nice. I like how it looks all black. It also looked like if that was a oem stock engine like thats how it came out straight outta the dealership. I cant wait to feel that power when he takes me out for a spin next week, and i hope i can go to the tracks with u guys. Let me know what time and when you guys are going.
jonchino
08-10-2006, 04:37 AM
twinscrew :biggrin:

I been MIA...