PDA

View Full Version : E39 M5 throttle bodies...(bore spacing?) pics

nuvolarossa
01-28-2007, 09:38 AM
Hi, I found on ebay these beauties:
http://i6.ebayimg.com/07/i/000/85/e6/929f_1.JPG
http://i9.ebayimg.com/04/i/000/85/e6/939f_1.JPG
http://i5.ebayimg.com/04/i/000/85/e6/9478_1.JPG
http://i6.ebayimg.com/01/i/000/85/e6/9554_1.JPG
http://i14.ebayimg.com/01/i/000/85/e6/9629_1.JPG
http://i22.ebayimg.com/04/i/000/85/e6/9727_1.JPG

They are 50mm diameter.
Do you think that they may bolt-on without adapter?
Who knows the bore spacing of M5 E39 (engine S62)

Please, post pic of M42/M44 head for see the bolts and intake's openings.

Let's talk about them!

note: I don't want to fit them, I'm just curious of what can be done in these engines (M42,M44)...
DustenT
01-28-2007, 06:28 PM
DASC intake manifold:

http://180customs.net/v-web/gallery/albums/Supercharger-Pics/DASC_Rotors_031.sized.jpg

I have a lower intake manifold off the car, let me know if you want me to measure bolt spacing/port spacing, etc...

Pic of intake side with no manifolds:

http://180customs.net/v-web/gallery/albums/Supercharger-Pics/DASC_Rotors_010.sized.jpg
mooseheadm5
01-29-2007, 03:58 AM
I can tell by looking that they will not bolt up without an adapter. M5 manifolds have more bolts than M42/44.
-P
nuvolarossa
01-29-2007, 11:19 AM
I can tell by looking that they will not bolt up without an adapter. M5 manifolds have more bolts than M42/44.
-P

Yes, I see it too...:frown:
What do you think are better, these 50mm from M5 with adapter or euro M3 E36 (I don't know their diameter) for a high revving stroked NA M4x?
ipswich318ti
03-06-2007, 01:12 AM
http://i34.photobucket.com/albums/d117/stevemitchell321/PICT0009small.jpg

http://i34.photobucket.com/albums/d117/stevemitchell321/PICT0005small.jpg
DustenT
03-06-2007, 01:17 AM
What are those ITBs off of?
Viper3812
03-06-2007, 01:28 AM
What are those ITBs off of?
Maybe an e30 M3? I know you can use that setup on the m42/m44 with an adapter plate.
Viper3812
03-06-2007, 01:42 AM
What are these from? k100? Would they fit onto our motor? This one isn't too far from me.
http://cgi.ebay.com/ebaymotors/BMW-K100-THROTTLE-BODIES-WITH-PLENUM-USED_W0QQcmdZViewItemQQcategoryZ35618QQihZ013QQitemZ230100242478QQrdZ1
ipswich318ti
03-06-2007, 02:12 AM
theyare off a m3 evo e36
Viper3812
03-06-2007, 02:15 AM
theyare off a m3 evo e36
Typo..... evo e30 you mean?
ipswich318ti
03-06-2007, 02:19 AM
nope 1997 M3 evo
pnosker
03-06-2007, 03:05 AM
Europe got better cars than us :(