PDA

View Full Version : pads+rotors... which ones?


sixafterfour
06-28-2007, 05:39 AM
hey guy, i need to pads and rotors for my car, what should i be getting?
probably will be going to lordco or a place like that

Viper3812
06-28-2007, 07:20 AM
Organic brake pads are good if you want minimal brake dust and bmpdesign has ATE rotors for a good price.

pnosker
06-28-2007, 07:21 AM
I have Akebono Pro Act pads and they're nice with zimm drilled rotors

1996 328ti
06-28-2007, 11:43 AM
Drilled are for looks.
I'd stick with stock rotors.
Just be sure they are quality.
I'd stay away from rotor/pad sets that are too cheap to be true.

There are dozens of pads to suggest.
Currently I run Carbotech Bobcats. They are pricey.
I'd also suggest Ultimate Axxis.
Ask 12 people and you will get 12 answers.

sixafterfour
06-29-2007, 12:24 AM
Ah well i went down to napa and checked some prices
i also asked about the 325 calipers, $100 each
so i figure i might aswell upgrade my brakes too.

so does it matter what year calipers i get for my car? or are they all the same

1996 328ti
06-29-2007, 12:48 AM
so does it matter what year calipers i get for my car? or are they all the sameCalipers need to match the rotors.

Front solid rotors to 4/98.
After 4/98, vented.

Rear, no changes.

momorugger
06-29-2007, 01:13 AM
EBC green stuff pads are good, or if you are more serious, red pads are the way to go.

Marv17
07-29-2007, 08:37 PM
okay. i was looking for new pads for all 4 since they're getting low and squeaking a bit. however as i was looking at the ebc pads it mentioned two different diameter sizes. so i how do i find out what diameter rotors i have? its all stock.
should i go with the green or red pads?