View Full Version : brake rotors
momorugger
06-29-2007, 11:09 PM
I've removed tht allen screw in the disc, but the disc still won't come out. I have removed the calipers, but I just can't get the disc off. any help? My camera is at work, so no pictures. How do I remove the discs from the gold central hub.
1996 328ti
06-29-2007, 11:35 PM
I'd let some penetrating fluid soak in around the center.
PB Blaster seems to be popular.
Give it some time.
Then try a BFH.
Just watch your toes.
You might want to use some anti-seize against the hub and rotor.
Also in the hex screw.
momorugger
06-30-2007, 12:32 AM
the BFH worked after a while. now if I can only get these freakin' pads in the calipers!!!!
1996 328ti
06-30-2007, 02:03 AM
the BFH worked after a while. now if I can only get these freakin' pads in the calipers!!!!The piston needs to be pushed all the way in.
DocDuvi
06-30-2007, 03:45 AM
well a hammer always comes handy!! in those situations!!
removing rotors that is not installing pads!
speedracerf4i
07-02-2007, 09:35 PM
I just replaced my rotors this past weekend. Make sure you release your parking brakes. Then hammer the rotor, then turn 180 degrees, and hammer again until out.
vBulletin® v3.8.8, Copyright ©2000-2024, vBulletin Solutions, Inc.