AutoX Alignment Settings

[Storz]

Just wondering what you guys are running? I am thinking of getting my car aligned properly and would like to have it set up as aggressive as possible for autox.

Its totally stock right now as well.

[gimp]

If you are stock, there won't be a lot you can do.

Camber is what you really need, and unfortunately you have no way to adjust it up front. Camber shims are a quick and easy way to dial in some more negative camber (I'm using a full shim kit plus whatever the H&R Race springs gave me).

A little bit of toe out - 1/8" total toe out should be good in the front.
And some toe in out back - 1/4" toe in.

Should you get a way to adjust camber, -3 to -5 works in the front (I'm running closer to -3, and -1 to -2 works in the back (I'm about -1.5).

What class are you running?

[Storz]

GS

[316i compact]

You need a lot negative caber in the front. 2.5 degrees or more. Get a shim kit and the camber corrction bolts from BMW and u should get 2,5.

[gimp]

The shim kit and bolts will take him out of GS.

Just get the toe set and have fun.

[316i compact]

Didn't know that, sorry.

[gimp]

Not a problem. That's why we have message boards!