Blower resistor (aka final stage)

[oakley]

4391
start here
4392
undo these nuts
4393
and these
4394
lift out leaf guard, then undo the 2 screws at either end under the guard..This will allow you to lift the part right out of the way..
4395
remove this bit....

[oakley]

4396
plastic baffle
4397
really heavy bit!!
4398
Micro filters
4399
BINGO!!!
4400
Here it is removed and side on..(u'll need a tork screwdriver for this)

[oakley]

4401
From the front
4402
When you start putting it all back together u'll notice the cover fits into a small ledge..Takes a while to get it to all fit right!!!!!

[oakley]

U should find its all fairly easy anyways!!

[95clrdo318]

Just finished replacing mine. Took a little effort but worked very well in the end. Great job with the images! It's nice having a blower that works on all four speeds!