View Full Version : F/S - 1994 M325is Estoril Blue
sanantonioch
05-16-2008, 01:03 AM
1994 BMW 325is - Sold as-is, Estoril Blue, M3 Mirrors, M3Front Bumper, M3 Spoiler, M3 Side Badges, M3 Exhaust, HID's, New Clutch and throw-out bearing with lightweight flywheel, New UUC trany mounts, New Rear Shock Mounts, Koni adjustable supension with H&R sport springs, Goodrich stainless brake lines, Hawk Pads on all corners, Ate Grooved Rotors upfront, Slotted rear rotors, Contour Rims (Un-Staggered). Parts in boxes: Euro rear tail lights, interior sunroof seal, trunk seal, UUC Evo Short Shifter (New in box), Redline diff. fluids, Redline Tranny fluids, Mobile 1 Synthetic (10 qts), 3 Mahle Oil Filters, Bentley Manual, Haines Manual, extra set of Countors (Staggered), M3 Front Lip, Extra set of grills, stock 325is mirrors (Car has M3 mirrors installed), clear M3 Side Markers, New Stainless Clutch Line.
Reset tool (in picture) is not for sale.
Problems: Car has a small dent on the driver's side rear quarter panel from a hit and run accident , both driver and passenger side window motors don't work, and the car needs a new headliner.
Car drives and has cold A/C, oil changes every 3,500 miles, car has 131k miles.
$4000 or make an offer and its all yours.
305-323-4278 - Max
PS - If car doesn't sell by the end of next week it will be completely parted out. Just check back for more details.
http://img153.imageshack.us/img153/6787/dsc00322dn6.jpg
http://img153.imageshack.us/img153/2776/dsc00312to7.jpg
http://img153.imageshack.us/img153/3637/dsc00302ez4.jpg
http://img153.imageshack.us/img153/3904/dsc00292vu1.jpg
Philly
05-16-2008, 04:34 AM
If you do decide to part it out...
dibs on :
headlights
eyebrows
fogs
UUC tranny mounts
maybe the shift kit and maybe front springs (& rears if u won't seperate)
sanantonioch
05-16-2008, 12:37 PM
That sounds good, first come first served.
thesk8nmidget
05-16-2008, 03:11 PM
well i call second dibs on headlights!
hopefully you can get a ti out of this part out or sale.
the car sure is clean!
teetime4one
05-16-2008, 03:23 PM
DIBS on the mirrors (driver & Passenger side)
thesk8nmidget
05-16-2008, 03:27 PM
they wont work sean.. have to be sedan :(
teetime4one
05-16-2008, 03:29 PM
awww man.
i guess i need to do a new set then.
thanks Josh.
thesk8nmidget
05-16-2008, 03:42 PM
yeah no problem.
If it comes to the part-out, I'd be interested in a set of the Contours.
Thanks.
Philly
05-16-2008, 06:38 PM
come to think about it, those headlights won't fit my car either.... damn
still, dibs on everything else i said :wink:
Watchmyradical
05-16-2008, 06:54 PM
i could use some of the engine parts if it comes down to parting.
Marv17
05-16-2008, 06:56 PM
yeah sean. i was about to say its unfortunate that those mirrors wont fit. :frown:
but good luck to the OP.
jeff318
05-16-2008, 06:57 PM
dips on flywheel. pm sent
thesk8nmidget
05-16-2008, 06:59 PM
i wonder if you can pop the mirrors off the base and then connect them to a sedan base??
Marv17
05-16-2008, 07:00 PM
DIBS on the mirrors (driver & Passenger side)
i wonder if you can pop the mirrors off the base and then connect them to a sedan base??
maybe. thats worth a shot. but how or where would you get just the bases for the m3 mirrors?
thesk8nmidget
05-16-2008, 07:02 PM
just thinking for myself. dont really know why just curios lol
i need the motor out of an m3 mirror
teetime4one
05-16-2008, 08:51 PM
i'll torture myself with another DDM tunning purchase.
maybe i'll do it tonight.
thesk8nmidget
05-16-2008, 08:52 PM
hahah sean get the black grills while your at it!
teetime4one
05-16-2008, 09:14 PM
i'm thinking this: new headlights, black grills and M3 mirrors.
then i'll be set!
thesk8nmidget
05-17-2008, 02:23 AM
Agreed Sean! She will look sick!
cooljess76
05-17-2008, 02:40 AM
come to think about it, those headlights won't fit my car either.... damn
still, dibs on everything else i said :wink:
Unless they're the one-piece headlight with integrated corners, they'll fit our cars. They don't look like the one-piece design, so you should be good on that, but with DDM's prices you cant go wrong with a set of their Depos or Apexcones with their preinstalled HID packages. Also can't beat their prices on M3 mirrors either. I'd rather spend a hundred bucks and get a set that fits our cars than trying to find sedan M3 base plates.
OP, I hope you're not parting this out because of the damages mentioned. I mean, a couple window regulators/motors, a headliner and a dented rear quarter panel just doesn't seem so bad. While the dent on the rear quarter panel is FAR from small like you mentioned, it can easily be repaired. Such a nice car shouldn't be parted out. How's the motor and tranny? Does it have a salvage title?
tiFreak
05-17-2008, 02:50 AM
i wonder if you can pop the mirrors off the base and then connect them to a sedan base??
talk to thekid, he got a set of coupe M3 mirrors to fit his ti, I think he drilled new holes
Envious
05-17-2008, 03:34 AM
:eek: Why part out such a beautiful car? But if you do I might hit you up for the tranny in about a month.:smile:
Mendi3
05-18-2008, 07:23 PM
If Philly does't get the eyebrows, I will take them.
Thanks.
vBulletin® v3.7.5, Copyright ©2000-2009, Jelsoft Enterprises Ltd.