ti notebook M42 intake modification

[ahutson03]

Just to let y'all know that air cleaner adapter (Mr. Gasket part #6404) is a discontinued part. Im looking for an alternative right now. If I find anything i'll let you guys know. But if you know anything I can do write back to me.

[sildergu]

I've not been able to locate that Mr. Gasket part either, I found something else that works. A drain pipe reducer, 4 inch to 3 inch, fits almost like it was made for it, wander around at Home Depot, you'll see what I mean. Get the cheap flexy one, not the stiff rigid one. The 3 inch end jams right into the factory cold air snorkel, the four inch end needs a slit cut into it to jam it through the hole in the airbox where that horn used to live. Total cost, about a buck and a half.

Everyone's looking for a cold air intake when there's one on the car.