installing clear corners

[BMWNate]

And i have no idea how to do it... http://www.happytogether.com/318ti/forum/frown.gif

can anyone lend me some advice please... it would be greatly appreciated. http://www.happytogether.com/318ti/forum/smile.gif

[bmwracefan]

Look at the new lights. See the verticle tabs that lock into the housing on the car? Use a long screw driver to release the tab that secures the light to the car. They have a double release, meaning there are 2 catches in the mount to help keep the light from just popping out. Push the release over and slide the old light out. Put a new amber bulb in the bulb socket and reinstall same into new light. Slide new light into housing making sure that the alignment guides fit smoothly into the car. Push light in to engage the first lock. If it engages easily, firmly push the light all the way in so that engages the send lock. Remember it double clicks. This is an easy job, just don't force anything as it is made of plastic.

------------------
Dave

[bbnmcas]

I have a 95 and I can only see one tab to release. It is large and close to the headlight. Is there another one on the other side, on top, or in the middle? I can't seem to find any other tab and the new clear corner only has one tab as well. Any other suggestions?