Ladies' DIY Passport BMW August 15, 2009

[bimmernupe]

http://www.bimmerfest.com/forums/attachment.php?attachmentid=196789&d=1250043061

[Times]

Is it too late to sign up for this? I've been very---out of the loop. :S

[1996 328ti]

Is it too late to sign up for this? I've been very---out of the loop. :S
Tell them you know me. ;)






Maybe not. :)

[milehigh96caliti]

Awww I wish I could go! I have to put brakes on the vert. I got a quote this morning for $585 for the front and $545 for the rear...they are nuts!

[Times]

Awww I wish I could go! I have to put brakes on the vert. I got a quote this morning for $585 for the front and $545 for the rear...they are nuts!

Hunny you can do this yourself, it's pretty simple. I had to replace both front and rear pads and rotors + sensors. cost $300, roughly.

[bimmernupe]

Hunny you can do this yourself, it's pretty simple. I had to replace both front and rear pads and rotors + sensors. cost $300, roughly.

It is ok to come. Send your RSVP angeladq@yahoo.com

[bimmernupe]

Bump for infotainment tomorrow.:biggrin:

[milehigh96caliti]

I was told Just Brakes could do them for a lot less, not using high performance parts. Unfortunately, since my car is high performance even DIY the parts are over $300 for front and $300 for rear. I would try my hand at it, but I wouldn't want to practice on my dd...so one of the ti guys is going to do it for me as soon as I order the parts in. Thanks though!

[Times]

Do you have like crazy nomex(Aramid Soft Fiber) pads that are fire resistant? :) I was really curious about those when I was buying breakpads. ^_^

[milehigh96caliti]

I have no clue what's on there. I wish I could do it though. I have a 2002 330ci convertible and my husband has the ti. He would be the doing the work if he was here, but he's out of commission for a while. :rolleyes: