What parts would I swap on the suspension for a Sixer.

[Panzer_M]

Figured this would be where I start first.

I can run a six suspension with a 4 cyl, Overkill but one peg down of the project.

Just what all would I need for the parts list?

Struts/Springs? Which should I use?
Brakes?
control arms?
I have M3 bushing now on the control arms, just done about 2 months ago.

[J!m]

I would recomend collecting the parts, and doing everything at once, if at all possible...

[Panzer_M]

yea if I collect EVERYTHING

Active_Autowerk would charge me 4500$ for install.

Not bad considering the 10k in parts I need to locate before hand.

[J!m]

I will install it all for much less.

Parts can be found used fairly easily- just be sure the bushings are in good shape before you give it to me, or you will pay me for grunt work (which you don't want to do)...

J!m