FS: HARTGE 318ti Rear Spoilers

[auto-mark]

New authentic HARTGE roof and rear deck lide spoilers for the 318ti (compact) for sale. $229 each or $429 for a set. Painting to match OEM BMW colors available from $125. Picture shows rear decklid unit. Additional photos and more details at www.auto-mark.com.

Mark

[Platanos]

I just bought one of these in an ebay auction from this member. I didn't know he/she had a site.

notice this thread was started in Aug. 2004

[Tyler]

How much did you buy it for?

[L84THSKY]

I just checked my old e-mails. I paid $137.50 for my Hartge roof spoiler new.

How much did you buy it for?

[Platanos]

How much did you buy it for?

174.55 shipping included for the trunk lip

[Tyler]

174.55 shipping included for the trunk lip

I was just wondering since the website above said $179,i didn't know if you got a better deal.

[moku]

I was just wondering since the website above said $179,i didn't know if you got a better deal.
The prices have gone down recently on the Auto-Mark website. When I bought mine from him a few months ago, I paid $400 for both. Today they're even cheaper than that: $349 shipped.

[Tyler]

IMO i would only buy a trunk spoiler. With both of them on there it looks fugly to me. Their website lists the trunk spoiler at 179 and for both of them it's the 349.

[jetblackbimmer]

I can't even tell what it looks like from the pictures being so small. no detail.

[Platanos]

I can't even tell what it looks like from the pictures being so small. no detail.


When I get mine painted and mounted, I'll take lots of pictures:dance:

I think I saved a little:confused2 Does the price on the website include shipping?

[jetblackbimmer]

if you buy both for 3... shipping is incl.

Single piece for 17... Shipping is $15


You save $40 if you buy both

[moku]

IMO i would only buy a trunk spoiler. With both of them on there it looks fugly to me. Their website lists the trunk spoiler at 179 and for both of them it's the 349.
I actually have both on my car and I think they compliment each well. The trunk spoiler is very unique and the addition of the roof spoiler makes the car look lower and wider overall.

[JedzE36/5]

i just picked one up for $124.50 shippednon eBay this morning from auto-mark.

moki - do you have any more pictures of the spoiler on the car?

[Platanos]

i just picked one up for $124.50 shippednon eBay this morning from auto-mark.

moki - do you have any more pictures of the spoiler on the car?

You got a better deal than I did!!!

I'm getting mine painted this week. I'll post some pics asap.

[JedzE36/5]

yea im gonna paint mine this weekend too. im stoked.

[jetblackbimmer]

Make sure the pictures are big enough to see. I don't know what it looks like because those pics on the site are tiny.

[JedzE36/5]

ok i got mine painted and i need to install it. anyone know how to read german because the instructions and installation product labels are all in german.

[Platanos]

I need to install mine too. It came with adhesive but mine was cured inside the tube. So now I need to go buy some adhesive but don't know what the strongest one out there is. Any ideas?


http://www.318ti.org/forum/showthread.php?t=11472

[moku]

Here are some pictures of how my Hartge roof and trunk spoilers look on my car:

http://www.moku3.com/bmw/hartge_angle.jpg

http://www.moku3.com/bmw/hartge_above.jpg

[JedzE36/5]

I need to install mine too. It came with adhesive but mine was cured inside the tube. So now I need to go buy some adhesive but don't know what the strongest one out there is. Any ideas?


http://www.318ti.org/forum/showthread.php?t=11472

ok so now a tube full of adhesive and a can full of some liquid came with the spoiler. what is in the can? is it epoxy, so i need to mix the contents of the can and the tube? or is the liquid some sort of cleaner?

[Platanos]

ok so now a tube full of adhesive and a can full of some liquid came with the spoiler. what is in the can? is it epoxy, so i need to mix the contents of the can and the tube? or is the liquid some sort of cleaner?


The liquid in the can is a cleaner. The stuff in the tube is the adhesive. Sand the side of the spoiler down a bit. Then clean both the hatch and the spoiler surface with the cleaner. Now apply alot of the adhesive and stick that sucker on. Use tape to hold it in place for a few hours. I had to buy some 3M adhesive because that tube that came with the spoiler was hard as a rock (cured). I have a few picks of it mounted in the other thread. Take some pics when you have it installed. I bet it will look SWEET on your alpine:2pistole:

[JedzE36/5]

i hope it does. i didnt get it painted all alpine. well i painted most of it except the sides of the top. i dont know how to explain it. the spoiler wont be up until next week bc i have to go to kansas city but i will put up pics 4 sure.

[JedzE36/5]

Here are some pictures of how my Hartge roof and trunk spoilers look on my car:

http://www.moku3.com/bmw/hartge_angle.jpg

http://www.moku3.com/bmw/hartge_above.jpg

oh that roof spoiler is hott. that in conjunction with the lip spoiler gives the car a whole different look.

[moku]

oh that roof spoiler is hott. that in conjunction with the lip spoiler gives the car a whole different look.
Thanks. :) I think each by themselves look good, but the combination of the two looks even better and really changes the way the back of our cars look. I like that it's very unique.

[Platanos]

Thanks. :) I think each by themselves look good, but the combination of the two looks even better and really changes the way the back of our cars look. I like that it's very unique.

Is that a Hartge roof spoiler? I've saving my pennies for the OEM factory roof spoiler. I think the dealer wants over $300 for it though:eek:

[moku]

Is that a Hartge roof spoiler? I've saving my pennies for the OEM factory roof spoiler. I think the dealer wants over $300 for it though:eek:
Yep, both spoilers are Hartge.

Are you getting the factory M-tech roof spoiler? It's much bigger and sticks out a lot more than the Hartge or ACS roof spoilers. Which may explain why it costs more, other than the fact that it's OEM.

I thought about getting the M-tech roof spoiler before, because it's different, but I like the combination of the Hartge roof and trunk spoilers instead, not to mention cheaper.

[maverick]

I bought the roof spolier/tail spoiler kit from Auto-Mark and it seems I got the last roof spoiler in the country and there is only one tail spoiler left. Mark says he is not getting anymore, so if someone wants it, better act fast.

It looks like quality stuff and my adhesive looks good for both pieces. It may be awhile until I can get them painted and installed. My color is Alaska Blau and it is kind of tough to get, but I have some and i hope it is still good. This will be my first attempt at finishing PUR and attaching aero with adhesive, so any hints are appreciated.

I am not sure if I will use the adhesive or some of the 3M tape at this point.

Now I just need to find a front splitter or lip spoiler for my 96 ti Sport front bumper:-)

Maverick

[Platanos]

I am not sure if I will use the adhesive or some of the 3M tape at this point.




I used both.

maybe are cars will be RARE:tongue:

[sublimeti]

I just bought the last hartge spoiler....i wish i could have gotten the roof spoiler.

[pdxmotorhead]

I bought the roof spolier/tail spoiler kit from Auto-Mark and it seems I got the last roof spoiler in the country and there is only one tail spoiler left. Mark says he is not getting anymore, so if someone wants it, better act fast.

It looks like quality stuff and my adhesive looks good for both pieces. It may be awhile until I can get them painted and installed. My color is Alaska Blau and it is kind of tough to get, but I have some and i hope it is still good. This will be my first attempt at finishing PUR and attaching aero with adhesive, so any hints are appreciated.

I am not sure if I will use the adhesive or some of the 3M tape at this point.

Now I just need to find a front splitter or lip spoiler for my 96 ti Sport front bumper:-)

Maverick

For most auto paint there is a flex additive for painting plastic bumper covers and such, I think the PUR parts need it as well.... I'd call the Sikkens Tech Line..

Dave