PDA

View Full Version : P0133 Code: Which O2 Sensor to replace?


TroyAndEddie
09-14-2011, 10:45 PM
Pulled a P0133 code (Oxygen Sensor Circuit Slow Response (Bank1, Sensor1)) before resetting it. Found out it's one of the O2 sensors, but I don't know which one to replace? Is it #7 or #8 in this diagram?

http://realoem.com/bmw/diagrams/f/r/196.png

familytruckster
09-14-2011, 11:11 PM
Bank 1 sensor one is the pre-cat one. Number 7.

IgotBMW
09-14-2011, 11:52 PM
I second that. Easy DIY. Just may be tough to break the O2 sensor nut.

familytruckster
09-15-2011, 12:28 AM
Though before ordering, make sure all the vacuum lines and intake boot are good. Leaks can cause some 02 codes to be thrown.

Gaston
12-09-2012, 09:23 PM
Are both these O2 sensors the same part #?

I only see 1 type here:

http://www.pelicanparts.com/bmw/catalog/shopcart/BE36/POR_BE36_EXHmuf_pg2.htm

pdxmotorhead
12-11-2012, 07:56 AM
There are several lengths of wires on the sensors depending on Auto vs manual and OBD1 vs OBD 2... I found that my local auto parts store sold the Bosche sensor in their generic box for 1/4 of the cost of BMW...

Dave

Gaston
12-11-2012, 01:24 PM
NAPA, Pepboys, Autozone?

How much?