DIY

[black98]

I have looked all over for a DIY wright up for the cam position sensor i have the sensor ordered but i need to know what else to get before i start this project any guidence would be appreciated

[slow_ti]

http://www.youtube.com/watch?v=nz7RdAL4ARE&feature=youtube_gdata_player

I followed this


Sent from my iPhone using Tapatalk

[black98]

Thanks for the info

[Ralliart10]

Its pretty easy job it only took me 30 mins

[black98]

So i replaced the cam sensor in thirty mins went to start and nothing tried to start with wo throttle but no go. Another thirty mins later put old one back in and it started right up. My thought is that i got a bad cam sensor going to auto store to return and wait another three days for a new one. Has anyone else ran into this problem??

[slow_ti]

Go to BMW. It's worth the extra few bucks


Sent from my iPhone using Tapatalk

[Ralliart10]

I got mine from Pelican had no issues.

[black98]

I am going to have to do that rather than getting it from the part store in town

[lazoh]

Dealer is best and I went through that as well, make sure to give them your vin number to ensure you get the right part.