98318ti
04-10-2012, 02:54 AM
I finally got a chance to tear down the old M44 and since I have enjoyed reading
and learning from this site I thought I would offer you guys the parts first.
Here is a list of what I have and a few pics.
M44 Head - $300 Has 2 bent valves from rod letting go but otherwise looks fine
never overheated.
Intake Manifold, upper and lower - $80
Valve cover - $50
Oil Pan - $50 Windage tray is broken where rod hit but pan is in good shape
Alternator - $30
AC Compressor - $30
Power steering pump - $30
Upper timing chain cover - $20
Oil Filter assembly - $20
Motor braces left and right - $10 apiece
Dipstick tube and dipstick - $10
I also have a usable clutch and pressure plate with less than 10k mile if someone
just needs repair parts. - $30
Exhaust header - $20 As can be seen the PO took a sawzall to this for some
reason. The reason I am listing is maybe someone could repair or use it to cut
up for a turbo header or something.
All prices are minus shipping, paypal only.
Dave
and learning from this site I thought I would offer you guys the parts first.
Here is a list of what I have and a few pics.
M44 Head - $300 Has 2 bent valves from rod letting go but otherwise looks fine
never overheated.
Intake Manifold, upper and lower - $80
Valve cover - $50
Oil Pan - $50 Windage tray is broken where rod hit but pan is in good shape
Alternator - $30
AC Compressor - $30
Power steering pump - $30
Upper timing chain cover - $20
Oil Filter assembly - $20
Motor braces left and right - $10 apiece
Dipstick tube and dipstick - $10
I also have a usable clutch and pressure plate with less than 10k mile if someone
just needs repair parts. - $30
Exhaust header - $20 As can be seen the PO took a sawzall to this for some
reason. The reason I am listing is maybe someone could repair or use it to cut
up for a turbo header or something.
All prices are minus shipping, paypal only.
Dave