garage clean up

[Jean H.318TI]

so i clean my garage the other day and found a bunch of parts that i dont need so before they end up in the garbage maybe someone will have some use for it.
cheap, all prices + shipping

exterior:

front bumper moldings - painted red - m bumper - license plate holes- $30
side markers - orange- $5

interior:

all the plastic interior pieces -dash - $100
rear seats - $100
front/door panels - $50
sunroof motor - $25
10speakers amp - $15
trunk mat w/elastic straps - $10
front/rear ash trays - $5
trunk plastic trays - $10
trunk/hatch plastic liners - $25
airducts under dash/carpet left/right - $20
oohh **** handles - $5
wire covers/protectors under carpet - $5
center console - $15 (red)
glove box - $25 (red)
underdash driver side - $10 (red)

engine:

m44 injector - $20
m44 cam sensor -$10
m44 crank sensor - $10
m44 thermostat housing w/ thermostat - $free
m44 cam gears - $20
m44 AC pulley (front of crank) - $5
m44 crank pulley - $10
m44 water pump - $10
m44 headers w/ down pipe - $25
m44 head (bent exhaust valve cyl. 2) - $60
m44 valve cover - $40
m44 oil filter housing w/ cap - $20
m44 (2) upper timing chain covers - $5ea

m44/42 copper head gaskets (new, stock thickness) - $80
m44/42 engine mount/bracket (3 left/driver side) - $10ea
m44/42 engine mount/bracket (1 right/pass side) - $10

m42 idler motor - $10
m42 alternator braket - $10
m42 alternator - $10
m42 intake manifold w/ TB (1 upper/2 lower) - $30
m42 engine wiring harness w/DME - $40
m42 crank pulley - $10
m42 intake/exhaust cams - $50
m42 cam gears intake/exhaust - $10
m42 lower timing cover - $10
m42 connecting rods - $80 set
m42 crank - $100
m42 block - $150
m42 oil cap (2) - $5ea

brakes:

front 318ti brakes non vented, calipers, spindles (red) - free

tranny:

318ti dual mass flywheel (needs resurface cus of rust on surface) - $20
318ti clutch kit (disk/pressure plate) - $20
m3 manual 6 bolts drive shaft - $120
m3 manual 4 bolts rear section driveshaft - $40
318ti manual front section drive shaft - $20
m3 guibo (almost new) and center bearing - $40

others:

speed sensor - rear diff- $5

all brand new
Input Shaftseal (23 12 1 222 972) - $5
Repair kit oil seal (23 12 1 222 771) - $5
Gasket RR crank (11 14 1 265 028) - $5
Crankshaft seal (054 115 147B VR) - $5
Engine Seal- Rear (11 14 1 706 785) - $5
ABS Main Relay (61 36 1 393 404) - $5
Muffler Hanger (18 21 1 247 422) - $5


all prices are negotiable, let me know what you guys need/want

[black98]

m3 bumper brake ducts is this the part that goes from the inner fender to the bumper, if so do you have pics and how much and shipping to 80021

[Jean H.318TI]

m3 bumper brake ducts is this the part that goes from the inner fender to the bumper, if so do you have pics and how much and shipping to 80021


$10 plus shipping and yes is the part that goes from the bumper to the inner part of the fender liner

[black98]

OK I will take them and what do you think for shipping? oops forgot to ask is this for two of the brake ducts and the condition of them? One other thing i saw was the floor mats what kind of condition are they in?

[BlackBMWs]

Hi Jean! Sunroof motor and front ashtray to 95826? Does the lid on the ashtray function normally? Mine wont stay closed.

The sunroof motor is for a 95. I see 95 had two sunroof motors listed. Do you happen to know if the two are swappable?

What is the trunk plastic liner? Pic? Is this the liner that goes over the carpet to protect it? If so, if it is for a black interior, I'll take it if in good shape

Are the front door panels for a black sport? Black/grey pattern? If so, I need a pair for my 95.

Thanks! :cool:

[Jean H.318TI]

OK I will take them and what do you think for shipping? oops forgot to ask is this for two of the brake ducts and the condition of them? One other thing i saw was the floor mats what kind of condition are they in?

no idea what shipping would be.
yes is both left and right ducts and they r in good condition along with the floor mats

[Jean H.318TI]

sorry ashtray only not the lid and idk about the sunroof motor if its swappable or not mine is a 96

Hi Jean! Sunroof motor and front ashtray to 95826? Does the lid on the ashtray function normally? Mine wont stay closed.

The sunroof motor is for a 95. I see 95 had two sunroof motors listed. Do you happen to know if the two are swappable?

Thanks! :cool:

[black98]

PM Sent

[BlackBMWs]

sorry ashtray only not the lid and idk about the sunroof motor if its swappable or not mine is a 96

Thanks Jean! PM sent. Interested in which door panels you have and the trunk liner as well as the sunroof motor. :cool:

[CASTRO]

Ill take the brake ducts. Paypal ready. Let me know your paypal info ill send payment thanks

[black98]

Ill take the brake ducts. Paypal ready. Let me know your paypal info ill send payment thanks

Sorry castro I beat you to them

Sent from my PC36100 using Tapatalk 2

[Jean H.318TI]

sorry brake ducts are sold.

updated list

[318ti808]

Are the new parts OEM German or equivalent? For m44 or m42? I be interested in all.

[rochey6957]

color and condition of door panels. pics? would you ship?

[Jean H.318TI]

color and condition of door panels. pics? would you ship?

door panels are sold

[Jean H.318TI]

Are the new parts OEM German or equivalent? For m44 or m42? I be interested in all.

yes they are all factory parts or equivalent

[rochey6957]

Ok how about the ac pulley? Condition? Shipped to 18433

[CosTick]

What's the interior look like, condition, color, cloth/ leather? I really need dove grey door panels!

[Jean H.318TI]

Ok how about the ac pulley? Condition? Shipped to 18433

no AC pulley

[Jean H.318TI]

What's the interior look like, condition, color, cloth/ leather? I really need dove grey door panels!

all interior is sport interior, clotch(pattern) leather all black, have everything but the front door panels and seats

[lsa0628]

Hey Jean, still have the head? Is it the air pump version of the M44?
Thanks!

[Jean H.318TI]

no is the early m44 version with no air pump

[318ti808]

Do you still have the M42 block and do you know if I could use this to replace a M44 block?

Norman

[Jean H.318TI]

yes still have the block and no u would have to do some custom machine work to fit the m44 internals into the m42 block

[lsa0628]

For some reason I cant PM Norman. Norman, if you are still watching this thread, PM me. I may have a block.

Lorin

[318ti808]

Lorin
sent you an email.
Norman

[lsa0628]

Hi Jean, I just checked and I dont think there is any difference on the head between air pump and non-air pump motors. You said it had a bent exhaust valve. Any other damage? Has a shop looked at it? I wonder what that would cost to ship to California - 95746.

Lorin

[lsa0628]

Also, did you have any of the seals left? were those for M44?
Lorin

[Jean H.318TI]

yes i still have the seals listed as new and yes for the m44 motor, and about the bent valve idk but prolly expensive to ship and idk how bad is the damage and how much would it be to fix, i can send u pics if u want and then u can make a decision

[victell]

I need the two front door vapor seals (goes between the door panel and the door) and the EGR hose that runs across the front of the engine. Let me know if you still have these.

Vic

[lsa0628]

Hey Jean,
Crankshaft seal (054 115 147B VR) - $5
I cant find this PN anywhere. Wanted to make sure it was the seal that went behind the pulley on the front of the engine over the crankshaft. Is this the right PN?

If it is, how much to ship these two to California 95746?
Crankshaft seal (054 115 147B VR) - $5
Engine Seal- Rear (11 14 1 706 785) - $5

Before sending a pic, let me see how much it would cost to ship the head.

Thanks,
Lorin

[Jean H.318TI]

Sorry don't have any of those

[Borg561]

tranny:

318ti clutch kit (disk/pressure plate) - $20


What's the condition/mileage of the clutch? I need to replace mine really soon and this would be a huge savings, even if it only lasted for a year or two.

Justin

[Jean H.318TI]

Sorry I threw it away.