rennerb
01-04-2005, 02:16 AM
When you turn the key nothing happens. No clicking at all. The battery is good and I have voltage to the starter. There is a slight voltage drop when i turn the key to start about a 1/2 volt.
The only thing I had noticed with the starting prior to this was a slight delay before the starter would turn after turning the key to the start position. Maybe a half second or less. But it changed on occasion, very slight difference but noticable (longer delay) after being used to the delay as it was. I tried to identify the start relay (if there is one) but was unable to find any diagram inside the fuse box.
Any Ideas where to look to solve this ?
A manual is now on my shopping list..Always after the fact
95 318Ti Automatic
The only thing I had noticed with the starting prior to this was a slight delay before the starter would turn after turning the key to the start position. Maybe a half second or less. But it changed on occasion, very slight difference but noticable (longer delay) after being used to the delay as it was. I tried to identify the start relay (if there is one) but was unable to find any diagram inside the fuse box.
Any Ideas where to look to solve this ?
A manual is now on my shopping list..Always after the fact
95 318Ti Automatic