cocofunk
03-27-2018, 06:49 PM
I did the rear main seal. Unbolted the driveshaft, tranny, etc. Now I have a couple questions.
1. What the hell do I do to get the CSB back on? A previous owner seems to have cut into the body where the CSB bracket bolts on to and I do not have these bolts.
https://cdn4.pelicanparts.com/BMW/techarticles/BMW-Z3/84-TRANS-Driveshaft_and_Center_Support_Bearing_Replacement/images_small/pic07.jpg
2. Is there a way to F*** up bolting the tranny onto the engine? I am just hoping the tranny splines correctly went through the pressure plate and lined up correctly with the bearing. I ask because when I pushed the clutch (no brakes and fluid, all completely flushed) the pedal has no feel and springs up like a Jack-in-the-box.
1. What the hell do I do to get the CSB back on? A previous owner seems to have cut into the body where the CSB bracket bolts on to and I do not have these bolts.
https://cdn4.pelicanparts.com/BMW/techarticles/BMW-Z3/84-TRANS-Driveshaft_and_Center_Support_Bearing_Replacement/images_small/pic07.jpg
2. Is there a way to F*** up bolting the tranny onto the engine? I am just hoping the tranny splines correctly went through the pressure plate and lined up correctly with the bearing. I ask because when I pushed the clutch (no brakes and fluid, all completely flushed) the pedal has no feel and springs up like a Jack-in-the-box.