HID Swap Question

[M98318ti]

i am thinking of pulling a set of hids out of a mini but don't know how i would wire them in the reason i want them out of a mini is cause i can get them 4 free and if i can wire them into my car i have a free set of hids can anyone help me

[ZeroG]

i am thinking of pulling a set of hids out of a mini but don't know how i would wire them in the reason i want them out of a mini is cause i can get them 4 free and if i can wire them into my car i have a free set of hids can anyone help me

Pretty simple.. It would be really easy if you had a harness. If you don't it might be a little difficult. To sum it you need.

It take to positives to run HID's one on a 12 Volt switch (Usually the Balast), and then I diret line to the battery with an inline fuse.

Basically your current headlight plug will plug into the Blast assuming that they are universal, and then the balast plug goes into your Xenon bulb. On that same wire there should be a pig-tail that will go to the battery with the inline fuse.

-Chad