where to get a rear camber kit?

[m44ic]

I am planning to lower my car in the next few weeks and I have decided to go with bilstein sports and H&R sport springs 1.5 front 1.0 rear. But in the rear I notice on stock suspension the rear already has some camber and for my tires sake I will need to get a rear camber kit also. So I was wondering if any of you guys out there know of any good places to find them.

any help will be appreciated

Ross

[cali-ti]

http://www.318ti.org/forum/showthread.php?t=5508

[nick_hegel]

I got a front and rear kit from Bavarian Autosport!

[Yellowducky]

My 95 is lowered with H&Rs with 1.25" and 1" drop. I had alignment done right after and no chamber tire wear until now...

It has been 5 yrs since the lowering of the car and I just put on a new set of summers last yr, then I just noticed that there is excessive chamber wear and found out that it was due to worn trailing arm bushings. The shop told me that its gonne be 11 hrs labour (probably Chilton's job rate). Now I am at the point of seriously considering selling the car as the repair bills are mounting up.

Anyway, back to topic, check for the rear trailing arm bushings if you notice tire wear, before you invest in a set of camber kit.

[M98318ti]

I bought a rear kit 4 mine and it will replace the trailing arm bushings so that wont be a problem it was about 250 4 the rear i got it from Denon there num is 1-888-468-0688 hope this helps

[mickd]

I bought a rear kit 4 mine and it will replace the trailing arm bushings so that wont be a problem it was about 250 4 the rear i got it from Denon there num is 1-888-468-0688 hope this helps
Did you mean Dinan?

[M98318ti]

No they a perfomance shop in canada where i get all my parts but dinan does make one for the rear but you have to drop the subframe and weld it in