Big Boy UUC Clutch Stop.....

[L84THSKY]

Just picked up these items at UUC.

My new Vader seats have an adjustment under the front of the seat to extend support of your legs. This new creature comfort has gotten me lazy on the clutch pedal. I don't seem to be pushing the clutch in as far as I used to. This got me thinking maybe I should add a clutch stop to be sure I am pushing only as far as needed.

I heard that clutch stops will work with our cars, even though we have a starter switch on the clutch pedal. Also picked up the new bushings, my pedal sometimes squeaks.

[DustenT]

I made my own for under 50 cents, and I didn't have to wait for it to arrive. :icon_poke

It makes a nice difference, faster shifts.

[mickd]

Just picked up these items at UUC.

I heard that clutch stops will work with our cars, even though we have a starter switch on the clutch pedal.

'95 ti's don't have a starter switch on the clutch. What a useless device.

[schussey]

I have the Rogue Clutch Stop, and it works great. Basically a short throw kit, but for the clutch arm. Homemade ones work fine, but I went ahead and shelled out the $10.

-chris

[L84THSKY]

Mine was a whopping $20.00, and the rubber stop looks very thick. :_paper:

I have the Rogue Clutch Stop, and it works great. Basically a short throw kit, but for the clutch arm. Homemade ones work fine, but I went ahead and shelled out the $10.

-chris

[aceyx]

i just don't press mine down as much. normally the only time i get the pedal all the way down is putting it into 1st or reverse, and this clutch is still going at 85k.

[schussey]

Mine was a whopping $20.00, and the rubber stop looks very thick. :_paper:

yea, UUC just re-released their "Big Boy." The clutch stop they previously had out was identical to my Rogue (Rogue and UUC basically same company)

My Rogue one was like $15, i just rounded down :)

-chris

[L84THSKY]

The new Big Boy clutch stop is nice. I didn't even have to do any adjustment. I screwed in the Big Boy as far as it would turn, and then tighten the nut. The starter switch engages no problem.

Now, has anyone replaced the clutch pedal bushings? Was it a bitch?


I made my own for under 50 cents, and I didn't have to wait for it to arrive. :icon_poke

It makes a nice difference, faster shifts.

[schussey]

I have yet to do the clutch pedal bushings, but definitly need to. My clutch is mass squeaky.

Let me know how the install goes.

-chris