UUC tranny mounts [Archive]

DeadpaN

10-10-2005, 11:25 PM

ok so i got these mounts and reinforcers, but read somewhere that the using the "aluminum re-inforcements will make the ride harsh". should i even bother with them or just install the new mounts? anyone have any experience with these?http://img421.imageshack.us/img421/1732/tmepackthumb2vu.jpg (http://imageshack.us)

cossieturbo

10-20-2005, 10:06 PM

well I did invest in the UUC trany mounts, but I purchased the black ones with the Enforcers. I'll post a review when they are installed. You will have some additional vibration with the Red ones, but my friend lovers his anyway. If you do leave the Enforcers off try to find a few big Stainless Steal washers to get the same overall mounting height. Best of luck.

cossieturbo

DeadpaN

10-21-2005, 04:10 AM

thanks, yeah....on another site i saw that there were 2 types to choose from
doh! they only had the red ones at the place i bought them....i think mine are going on this weekend too.

1996 328ti

10-21-2005, 12:36 PM

You will feel more vibration through the shift lever. It really doesn't do much to the ride. Be careful not to over tightend them. I snapped one. When I originally had them installed my shift lever was hitting the drive shaft. Turned out I had an early SSK that did not have the ERK which raised the height of the lever. Now it's fine with a new UUC SSK.