PDA

View Full Version : custom intake question


raj27
04-02-2006, 07:21 AM
i was wondering if it is possible to see preformance increase if i did a custom intake setup. what i want to do is do a 2 1/2 or 3in piping down behind the fog light and top that off with a KnN cone filter.
i know there are set up ready to buy but i have limited cash and want to have some fun with my ti...
will i see preformance increace??

halek
04-02-2006, 12:38 PM
Your best bet is to fog your airbox imo. It's one of the first mods I did to my ti & I've never looked back.
http://www.logun.org/fog.htm

318ti_Portugal
04-02-2006, 12:58 PM
There isn't must to be gained by intakes on a TI except sound. Performance wise, the AFM limits the intake, and not the intake itself.

raj27
04-02-2006, 09:21 PM
i've heard of fogging the air box, but i have never seen any pics of it installed. so i dont want to charge blindly at it. thats why i'm going with this cold air set up. also it will cool.

cali-ti
04-02-2006, 10:06 PM
fogging is more or less installing a hose from the brake duct into the airbox. you should also debaffle if you keep the stock airbox. it seems the bafflling begins to break down and can easily clog up the filter.

DustenT
04-02-2006, 10:23 PM
i've heard of fogging the air box, but i have never seen any pics of it installed. so i dont want to charge blindly at it. thats why i'm going with this cold air set up. also it will cool.

Hugo just hydro-locked his car with a cold air intake. Intakes are for Hondas, the factory air box is fine, fogg it if you want a little extra flow.

raj27
04-02-2006, 10:50 PM
does anyone have any installed pic of a fogged system? i really went to see that hose from the brake duct up to the air box. thats why i am not considering a fogged system. i have never seen one.

cali-ti
04-02-2006, 10:52 PM
unfortunately, i think it's hard to get a pic in there.

raj27
04-02-2006, 11:19 PM
either that or could some one draw a detailed digram...

DaNO
04-03-2006, 01:51 AM
I put in an intake into my car.After removing all the stock stuff i had a cone comming out of where the box is for the fan, this cone is pointing tword my intake. i was wondering what this is and if it would cause me any problems? anyone?
thanks

halek
04-03-2006, 08:33 PM
There're some pics I took when doing mine in this thread
http://www.318ti.org/forum/showthread.php?t=6297

cali-ti
04-03-2006, 08:53 PM
that's a nice bit of craft halek!

raj27
04-03-2006, 11:49 PM
There're some pics I took when doing mine in this thread
http://www.318ti.org/forum/showthread.php?t=6297

thats cool! thanks!!