318ti.org forum (http://www.318ti.org/forum/index.php)
-   US and North America (http://www.318ti.org/forum/forumdisplay.php?f=13)
-   -   Assorted stuff from part-out: Dinan DME, Sport Springs, Manual Trans Swap kit (http://www.318ti.org/forum/showthread.php?t=26801)

PrussianMotors 05-21-2009 08:09 PM

Assorted stuff from part-out: Dinan DME, Sport Springs, Manual Trans Swap kit
 
4 Attachment(s)
Hi,

I have a bunch of stuff left over from my recent part out. All the parts came off a 1998 w/ 165k miles. All prices do not include shipping. If you need the shipping amount please PM me with your zip code. I can answer any fitment questions you have also.

Set of front & rear Sport package springs (turned out I didn't need them for my ti): $150 w/ front perches, $100 without

DME w/ Dinan software (installed by BMW): $200 Fits 01/97+ production E36 318i 318is 318ti. Bosch #0 261 203 668

Complete manual transmission swap: $500
Includes: driveshaft, pedal box without pedal covers, master & slave cyl, fluid lines, clutch & pressure plate, flywheel (not pictured), shifter & linkage, black leather boot, crossmember, gearbox. I did limited test driving up to 2nd gear. Felt fine except the clutch engagement was a high on the pedal.

Fuel pump, working when removed: $75 fits M42 and M44

Radiator, great condition: $75

Other random stuff: tail lights, sway bars, passenger door handle, front footwell speakers, factory amp, assorted modules (ews, wiper, body modules). PM me for prices.

I will ship most anything or you can pickup at my garage in Bridgeport, PA zip code 19405.

hotmilk400 05-22-2009 02:22 AM

ac compressor? i think mine works, but it blows a freakin fuse once on awhile..

would u be willing to install it if u did have one? thanks =]

PrussianMotors 05-22-2009 08:48 PM

Yes, the AC compressor is available. However, I think you should try replacing the AC compressor relay first, a malfunction there would probably blow your fuse. PM me if you want it, I should have one around. It would be much cheaper than a compressor.

As for installations, I am not insured to work on customer cars. Maybe in a year or two

hotmilk400 05-23-2009 02:33 AM

pm'ed

eurohb 06-08-2009 12:06 AM

How much to ship the whole manual set up to 92801

PrussianMotors 06-08-2009 06:14 PM

Quote:

Originally Posted by EuroJDMHB (Post 232020)
How much to ship the whole manual set up to 92801

I can do $150 on the shipping, and I will be paying for some of it (rubbermaid container, etc.)

dudem3 06-08-2009 07:24 PM

Do you have the throttle body?

PrussianMotors 06-08-2009 09:55 PM

Quote:

Originally Posted by dudem3 (Post 232152)
Do you have the throttle body?

Yep, $40 +ship. PM if you want it!

yoda 06-08-2009 11:30 PM

Do you still have the Manual swap?
If so will $150 be the same for 93610?

PrussianMotors 06-09-2009 05:56 PM

Quote:

Originally Posted by yoda (Post 232185)
Do you still have the Manual swap?
If so will $150 be the same for 93610?

Yes it is still available. Yes I can do $150 for shipping to you as well.

yoda 06-11-2009 05:05 AM

The Dinan DME, what does it do exactly? as in what did the software change HP/TRQ ,Rev Limit...:confused:

PrussianMotors 06-11-2009 04:55 PM

Here is a link the Dinan page on it:
http://www.dinancars.com/store/produ...cat=397&page=1

Says 8 hp & tq gain @ 5500 rpm, and raises rev limiter and eliminates speed governor.

You'll have to get the DME aligned to your EWS by a dealership or a shop with a GT1, fyi.


All times are GMT +1. The time now is 08:08 AM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org