318ti.org forum (http://www.318ti.org/forum/index.php)
-   Engine Swaps (http://www.318ti.org/forum/forumdisplay.php?f=26)
-   -   318ti M package with blown head gasket (http://www.318ti.org/forum/showthread.php?t=41648)

BRADESTAR 01-13-2018 10:08 PM

Whoo-boy. This is a lot of work! Going slowly. That 6 silly is a bigun.

I'm going to mess with some stuff whilst the engine/trans is out. Mainly a new clutch and flywheel that I have to put in that I am nervous as hell about. Those crappers cost about as much as the car...so hoping I don't mess that bit up! And other odds and ends.

Then I get to take apart another Ti....at least I'll be working on the final car though at that point. Was really hard pushing to get through the Z. By the end will have pretty well taken apart 3 cars....this is fun right? This is fun! Fun....

https://s19.postimg.cc/5f4e5s0xv/zpulling.jpg

https://s19.postimg.cc/sgkzbjnqr/zpulling2.jpg

BRADESTAR 02-23-2019 05:38 AM

Quote:

Originally Posted by xxxJohnBoyxxx (Post 374497)
What is a "Slightly Cupped Valve". Never heard of that type of damage. Most likely the head gasket is blown between cylinder 2 & 3 which will cause a lower compression number on those two cylinders as the compression leaks between the two cylinders.

Interested in what a cupped valve is if anyone can explain it to me.

Thanks, John S


Out with the old!

https://i.postimg.cc/s2Z4yYVr/silverengine1.jpg


…..and I guess this must be a "cupped valve". Though I don't see much cupping.

https://i.postimg.cc/zDwpVFTD/silver-Engine.jpg

BRADESTAR 05-07-2019 03:15 AM

Well that's enuf. Giving up on this thing. Off to the scrapper! Good riddance....you guys and your silly Ti projects!


https://i.postimg.cc/xCndSCBq/towing.jpg


All times are GMT +1. The time now is 01:16 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org