parting out a nice 95 (white TI ) I am parting out a nice Ti I used it for the engine . Everything is up for sale cheap let me know what you need and I will give price and shipping UPS comes here everyday. |
you can E-mail me @ transman321@gmail.com |
I will donate $2 to the site for every transaction |
Hmmm.... |
Are the rocker panels good? Non-rusted? |
I need a left quarter repair panel. What is the rust situation there? It seems mine rusted due to cracked paint when I rolled the rear openings. Right side is still fine, but left is not good. Let me know! |
there is no rust on this car |
how much of it do you need ? are you going to graft in the arches or replace the whole side with the door surround |
Probably just graft it. There is no rust on my car other than this spot which came through from the inside. I sprayed paint in the crease after I rolled it but not enough it seems... It’s one spot about 3” diameter after the rust is cut out. I’m not sure what you can realistically cut- are you using a die grinder or plasma cutter? Something else? Be careful on the right side as the expansion tank and charcoal canister are in that quarter. |
interior what color is the interior i have milpoint and grey |
Manual or Auto? I need a Diff from a manual car. |
is this car fully parted out yet? |
is the car still rolling? |
Any Fogs + assemble + switch +Headlight switch left? HVAC knobs (all 3) ;] |
All times are GMT +1. The time now is 04:01 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org