z3 shifter swap I'm doing an m52 swap and decided to do the z3 shifter swap while I'm at it... I had to get m52 shifter linkage and selector rod for the motor swap and used a z3 shifter It looks like I am going to have trouble with the selector rod scraping aginst the harmonic balancer on the drive shaft...did I pick the wrong selector rod..should I have gone with a z3 selector rod? |
im not completely sure, but the selector rod has to match the transmission. if you using a getreg, get a solector rod for a getreg. if your using a zf, use one for a zf. this may be the problem? like i said, not completely sure. ~john |
no that's completely false...you need to swap or modify shifter components when swapping engines but opt to keep the stock getrag transmission |
All times are GMT +1. The time now is 02:55 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org