318ti.org forum (http://www.318ti.org/forum/index.php)
-   Induction (http://www.318ti.org/forum/forumdisplay.php?f=25)
-   -   Turbo? (http://www.318ti.org/forum/showthread.php?t=28615)

Jessie2741 11-14-2009 10:14 AM

Turbo?
 
ok im curious sorry if someones asked this but if i get this
http://cgi.ebay.com/ebaymotors/92-93...Q5fAccessories
Id also be getting the obx manifold what else do you recomend?

RAiMA 11-14-2009 11:34 AM

fluffy dice :)

xxxJohnBoyxxx 11-14-2009 01:38 PM

Quote:

Originally Posted by Jessie2741 (Post 250729)
ok im curious sorry if someones asked this but if i get this
http://cgi.ebay.com/ebaymotors/92-93...Q5fAccessories
Id also be getting the obx manifold what else do you recomend?

What motor are you putting it on and how many pounds of boost do you wnat to run?

Looks like someone copied a kit I was putting together or copied everything under my hood expect the RRFPR and Turbo. That turbo should spool a little sooner then mine which is good since I don't spool to till 3,000rpm. It is missing one hose to convert the turbo outlet from 2" to 2.5" for your piping. I don't know the turbo brand but if you are smart you would take any turbo from EBay apart and loctite all bolts while you align it for your application.

Year, make of car and motor it's going on with expected boost please?

Jessie2741 11-14-2009 08:31 PM

It's going to be an m44 with 120k miles running like 8 pounds
Quote:

Originally Posted by xxxJohnBoyxxx (Post 250732)
What motor are you putting it on and how many pounds of boost do you wnat to run?

Looks like someone copied a kit I was putting together or copied everything under my hood expect the RRFPR and Turbo. That turbo should spool a little sooner then mine which is good since I don't spool to till 3,000rpm. It is missing one hose to convert the turbo outlet from 2" to 2.5" for your piping. I don't know the turbo brand but if you are smart you would take any turbo from EBay apart and loctite all bolts while you align it for your application.

Year, make of car and motor it's going on with expected boost please?


THAT318 11-14-2009 10:20 PM

u should be fine at 8 pounds of boost. following johnboys threads so i know a thing or two but no pro here. how much did you spend total buying yours all separate john?

Jessie2741 11-15-2009 02:59 AM

Ok I ordered mine today.
haha naww im messing around
Quote:

Originally Posted by RAiMA (Post 250731)
fluffy dice :)


persianbmw 11-15-2009 04:27 AM

be ready for a lot of custom work. headache. and downtime i got my car back yesterday after 4 weeks. A professional shop had issues doing it. Allot of of it was laziness on their part. but you will run into problems with that kit. John is the only person i have ever come in contact with, who knows the proper way around each problem. ur at a bit of an advantage because you are able to verbatim copy his install. good luck bud.

projekt EPiK 11-15-2009 04:33 PM

looks to be a fairly complete kit of components, only real problem is that they are ebay components and ebay quality.

i've been building kits for years now and seen pretty shoddy performance from ebay kits in general. most dangerous to the engine is the wastegate (44mm is way overkill for your application BTW) the ebay wastegate valve tends to stick when it gets hot and wouldnt open till 14+psi when it was forced open by sheer boost pressure, regardless of what ever spring pressure you were shooting for.. usually 5-8 psi on most stock bottom end cars. the increased boost spike will cause all sorts of problem for you on a stock engine stock fueled car that is only tuned to 8 psi....

the turbos are hit and miss, while the sizing is okay, the chinese made components are scary. my advice, do it right.. buy a garrett turbo at least, and a tial 38mm genuine wastegate. it will cost maybe $700.00 new for both, or much less than that for a slightly used deal and you will save a LOT of headache.

when i just re-did the setup on my Lexus i picked up the turbo i always wanted on SupraForums for $500.00 shipped, and the 44mm Tial wastegate for $275.00 shipped.. saving almost $500.00 overall..now my parts are bigger for the Supra 2jzgte engine, but you get the point.

Turbos are fun.. when they are done right, but getting there reliably can piss you off..trust me.

THAT318 11-15-2009 09:34 PM

+1 on the turbos are fun think projekt. i took my friends audi a4 for a lil "test drive" last night i got pulled over with in 30 seconds of leaving the house. it wasnt anything major cop just saw me going about 60 in 45 and let me go after seeing i wasnt drunk... i was geting sooooo boost happy tho it just makes me that much closer to wanting a turbo on my ti.

persianbmw 11-15-2009 09:38 PM

no doubt so fun i was able to roll with my friends 335xi chipped at 120 on friday he had no idea i could catch up to him so easily now its an awesome feeling knowing ur car can back up its looks.

projekt EPiK 11-15-2009 09:46 PM

the vw/audi almost has boost off idle it seems.. very easy to get boost happy there.

pretty impresive hanging with a chipped 335i, those things will be the next Supra in power capability.. same design, I-6 twin turbo too..

persianbmw 11-15-2009 09:53 PM

lol i dont want to mislead u guys he wasnt going balls out but we could never roll together before unless he was in neutral lol but yeah that night i also didnt have a boost guage or controller on so i was only half throttle and made it up to 120 real quick lol. Im significantly slower now that i threw on the boost controller and put it on min setting

THAT318 11-16-2009 08:32 AM

yea in the audi it does seem to boost real quick. i fell in love with all things turbo. :P
call me boost happy but i think im actually in love!


All times are GMT +1. The time now is 09:04 AM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org