318ti.org forum (http://www.318ti.org/forum/index.php)
-   Induction (http://www.318ti.org/forum/forumdisplay.php?f=25)
-   -   30lb Injectors on stock DASC (http://www.318ti.org/forum/showthread.php?t=41495)

cnlsanders 05-09-2015 11:27 PM

30lb Injectors on stock DASC
 
Is anybody running 30lb red top injectors on a stock DASC with the RRFPR? The used kit i bought came with red tops and my stock injectors wont fit in the injector bores of the DASC manifold that i bought (M44). I want to run the kit in stock form but dont want to have to modify the manifold to fit my stock injectors.

skimmer 05-10-2015 01:38 PM

I run my stock injectors with my stock set up so can't help you there.honstly don't think it would be a problem to run it with those injectors.

Why won't your stockers fit?is the hole to small for them,are you sure you don't have these installed. http://store.vacmotorsports.com/vac-...ors-p2454.aspx

cnlsanders 05-10-2015 09:41 PM

The manifold doesnt have any spacers installed. The injector bores are just smaller.

xxxJohnBoyxxx 05-11-2015 09:03 PM

You need injectors spacers to fit the injectors plus a DME tune for 30# injectors.


All times are GMT +1. The time now is 04:11 AM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org