weird problem
 

When I went to put my driver window back on track a while back I had a problem gettin the plug to the power mirrors to come off the switch and all the wires came out of the plug. I was wondering if anyone can direct me to a wiring diagram for the power mirror switch, I've looked all over our forums and even googled the hell out of it but I can't seem to find a diagram showing what wire goes where in the plug. Please help I haven't been able to adjust my mirrors sense that happened.

Here's some old photos from my M3 mirrors DIY, perhaps they'll help:
http://www.318ti.org/forum/showpost....70&postcount=2

otherwise, you should be able to look at your opposite mirror to see how it's wired:wink:

Thanks but it's not the mirrors, its the interior mirror switch, the mirror adjust controls, or whatever the 4 way joystick kinda switch that I'm having problems with. All the connectors that are supposed to be housed in a solid plug came out and I don't know what wire goes where in the plug. I will try and get a picture of what I'm talkin about to give more clarity on my problem.

oops, no worries. Give me 5 minutes, I'll take pics of mine.

Here ya go:

Thank you so much I've been lookin for this for almost two months now. Your a life saver

No worries.

Chapter 12-36 in the Haynes manual has the electrical schematic/pin-out for '95 and earlier typical e36 power mirror switch. 12-47 for '96 and later typical e36 power mirror switch. But it doesn't specify for the 318ti.


The Bentley manual adresses the 318ti specifically. ELE-242 in the Bentley manual has the schematic and pin-out for the 318ti power mirror switch.

Sometimes the internet just doesn't have it and you gotta refer to the book:wink:

Thanks a lot man your a great help

Found this today and this was clutch! Hey Heavy, when you assembled it does your work? Mine clicks, but does not move.

I had to replace the fuse, its one of the mid 20s.

Found and used this thread today - thanks!!

2023, still helpful thank you