DASC install manual needed Hello, new to the forum and BMW. I recently purchased a 97ti with a M44 that has a DASC. It did not come with an install manual. Does anyone have one in electronic form? I am looking to evaluate the crank case ventilation routing and this differs from stock form. Thanks, Chris |
dasc install Contact Jim at Downing Atlanta. They are very helpful and should be able to email you a pdf. Just make sure he knows exactly which m42 or M44 versions you have. If he can't help I may be able to find one, depending on what year. |
Quote:
I left a voice message this am, and will follow up within a day or so if I don't hear back. I did not have a contact name so it may take a bit longer. I have a 97 with the M44. I am not clear on the model of the SC, but will take another look after work. |
I know I have the 97+ M44 manual. If you give me an email address , I can forward it to you. |
Thanks for the offer. I was able to get it from the previous owner. I am still trouble shooting some vacuum and/or intake issues. There are stutters in the 2000 to the 2800 rpm range. The PO did some valve work, the exhaust is also a larger diameter than stock, the SC pulley is the smallest available and the car has a performance chip. I've replaced some hoses, clamps, etc., and it has gotten better, but this is mildly annoying, and I want to get it perfectly smooth. I believe the crank case valve is in need of replacement too and that will occur this weekend as it just arrived. The other item to address is a lower than normal idle for the first 1-2 minutes, etc. Once up to standard running temp it is fine. The forum advice is a bit all over the board, and without seeing/feeling/hearing it, it perhaps isn't realistic to diagnose the issue from a keyboard. Thanks again, and I hope to contribute to the knowledge base for others too. edit - pulled everything off can cleaned thoroughly. It runs nicely now. It could have been a dirty MAF sensor. |
Sound like the chip is not for the system. Might need some dyno tuning to get running properly and have a proper tune for the DASC. |
Quote:
|
Quote:
|
I think the forum will let me download it after 5 posts, but it sure is hard to rack up posts with how slow it is around here. |
Hi, are there any admins on here? I have the same problems trying to download files. |
All times are GMT +1. The time now is 12:54 PM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org