318ti.org forum (http://www.318ti.org/forum/index.php)
-   Parting out & Parts (US) (http://www.318ti.org/forum/forumdisplay.php?f=103)
-   -   Misc parts Lightweight Flywheel and Clutch (http://www.318ti.org/forum/showthread.php?t=44797)

gkatzens 01-15-2020 06:30 AM

Lightweight Flywheel and Clutch
 
Hello All,
I have a used AASCO Motorsports Aluminum flywheel part number 100807-11 that fits M42 and M44 engines. It is in great working order. Also included are the crankshaft bolts and a clutch. The pressure plate is an used Sachs plate and the disk is a solid un-sprung six puck with the metal matrix pads. We ran it in our retired ChumpCar and it literally never seemed to wear at all. But, I did notice a small bit of the clutch material has fractured and come off in one place. It was working great when removed. This is a cheap way to ditch your dual mass flywheel.

$325 plus shipping for all of it.

https://drive.google.com/file/d/16ZV...ew?usp=sharing

https://drive.google.com/open?id=1-6...eacwxckZvPaVto

https://drive.google.com/open?id=1uk...KjX1NNxSU131N1

Thanks!
Garrett
gkatzens@gmail.com

gkatzens 01-22-2020 06:18 AM

No reasonable offer refused!
Garrett


All times are GMT +1. The time now is 03:52 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2020, 318ti.org