E46 M3 Lightweight Flywheel QUESTION Hey guys will a E46 M3 Lightweight Flywheel fit an M52 transmision, If not how can I make it work. |
Clutch kit is incorrect and if im not mistaken, you need a different throwout bearing, slave, and not sure on the starter, but sure its nots the same. |
flywheel will bolt to the crank, but I believe that if you use an e46 flywheel you must use the clutch and trans from the era (e46). I looked in to this when I did my 6sp swap. |
All times are GMT +1. The time now is 01:14 PM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org