Strange vac diagram Looking at the m44 vac diagram, there is a T fitting with nothing attached on the top post. Is this correct? Thats how mine is setup too and im wondering if i have a disconnected vac line.https://uploads.tapatalk-cdn.com/201...613e95f57a.jpg |
No that's not right. Should be a line on there. I can't think of where that line goes off hand. One of them around there goes back to the fuel filter area. I think onto the FPR. Not sure that it's that one or not. |
Figure 2 is the area in question. Ill have another look, but i dont remember ever seeing a line on there, or seeing a disconected line lying near there. Thanks for the response |
Yep figure 2. After thinking, I'm fairly confident that is the line that goes to FPR on a stock Ti |
So figure 2, one end comes from the check valve, the other end goes to FPR, and the third line? |
Looking at the diagram there. Looks like it goes to upper intake somewhere. |
All times are GMT +1. The time now is 09:54 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org