New Wheels!
 

Hmm ... Hi All,

Had a small accident in my beemer last week. Hit a large rock in the road and took out two alloys ... ouch!

I did have these on my car ...

http://www.wheelworx.net/acatalog/mv3.jpg

Since I was buying some new wheels I looked around and decided to replace all my wheels rather than get two new ones ... so I bought a set of these!

http://www.wheelworx.net/acatalog/BMW_M6.jpg

M6 Alloys ... should be here tomorrow and fitted the next day ... pics to follow ...

Oh, these are for an E46 2002 318ti ...

Those could look cool. What size are they?

those look good, are they stock BMW rims? I notice it has a blank center cap and the little indent for the ///M badge but I've never seen them on another Bimmer before

18" man !!! They arrived today! A day early! They are wicked!

They are copies of the M6 alloys.

They have blank center caps at the mo, so I need to get the BMW labels for those and a set of the little M badges then you wouldn't know the difference.

Seriously nice set of wheels. Will get some nice photo's at the weekend.

omg i have always been in love with the M6 rims. cant wait to see them on your car.

mee too!!!

Gonna have to give it a wash before I take some pictures! ;)

Damn, wrong offset!!!!!!

Does anyone know what the best offset is for these wheels and a 2002 318ti?

The place I bought then said that these would fit but the are hanging out from the wheel arches!

I think they are 40 offset whereas I think the standard ones are more like 45-47 offset.

that little bit of offset should not make a difference... 40 to 45ish is almost negliable.

post pics.

If they are poking out too far, the offset would be lower... I have a 25et wheel in 17" and mine just barely poke out enough to touch the wheel arches - im guessing by the sounds of it you have a 20-25et wheel there.

Do you think so?

Hmm ... I really need to nail this as its going to cost a lot to send these wheels back and wait for a new set to arrive.

They definitely looked like they were poking out from the wheel arch too much. I'll grab a wheel in a mo and take a look for the offset on the rims I do have.

isn't the ET a US thing? It seems that over here in the UK everything is referred to in mm rather than a ET 'rating' ...

It just concerns me about MOT and wotnot. If it would fail an MOT it would mean I'm also not really insured ... which is a total nightmare thought. I'm wondering if there is a decent chart out there for the 318ti ... I've used google and not found anything.

ET is measured in MM over here, so I guess that its the same.

Hey Fella,

I just checked the wheels I have here ... they are ET35 ... that's way too low for my car. I think the current ones are ET45 ...

Ahhh ... :)

How wide is the wheel? I think you can do 35mm with up to an 8 inch wide wheel.

8 in. = 203.2 mm

Hi,

Yeah these are 8". This is a 318ti E46 though. And from what I can make out has a different wheel arch setup. My gut feeling is that they are too pokey outy! :)