318ti.org forum (http://www.318ti.org/forum/index.php)
-   Brakes (http://www.318ti.org/forum/forumdisplay.php?f=27)
-   -   993 big brake kit (http://www.318ti.org/forum/showthread.php?t=35961)

lionell247 04-10-2012 11:55 PM

993 big brake kit
 
Feeler I'm might be making brake brackets for 993 calipers aka bigred etc. If this gets lot of interest, I will be making rear brake brackets for the 318ti. Brackets will be CNC 7075 aircraft aluminum.

lionell247 04-10-2012 11:59 PM

Also working on a ti rear brakes set up with wilwood cross drilled vented rotor keeping the hand brake.

mohaughn 04-11-2012 05:13 PM

Most of what you are doing is already available, and the demand is very very low. You just don't need more than what the later model year vented rotors provide in terms of stopping performance. Even with a swap, I think the vented rotors are more than adequate.

1996 328ti 04-11-2012 08:26 PM

Quote:

Originally Posted by mohaughn (Post 326726)
Most of what you are doing is already available, and the demand is very very low. You just don't need more than what the later model year vented rotors provide in terms of stopping performance. Even with a swap, I think the vented rotors are more than adequate.

Agree. Just don't look as cool.

lionell247 04-12-2012 01:37 AM

I can really put any rotor its easy. there are kits for 996 but not the 993 there was one company but they don't make them anymore.

mohaughn 04-12-2012 02:56 AM

http://www.318ti.org/forum/showthread.php?t=32229

Ed lists the part number for the calipers on the 3rd page or so. Pretty sure those are 993 calipers, no? Looks like the 351426 part number is for that model span of 911.

I think they look great, and I'm sure they are very good calipers, but the market for this kind of thing is rather small, that's all I was saying.


All times are GMT +1. The time now is 03:14 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org