318ti.org forum (http://www.318ti.org/forum/index.php)
-   Engine Swaps (http://www.318ti.org/forum/forumdisplay.php?f=26)
-   -   SAP location with M52 swap? (http://www.318ti.org/forum/showthread.php?t=44087)

zachdog 01-11-2018 04:45 PM

SAP location with M52 swap?
 
I just took possession of a 1996 ti with a 328 engine from a '96 vert. My brother owns a shop and did the work. Neither of us can figure out where to install the secondary air pump since there's not much space after the swap. We did a complete key/ECU swap, so the car thinks it's a 328 vert.

1 - Where did others install the donor SAP in the ti with this swap? The CEL is on and I'd like to figure this out.

2 - Or, is there a thread with pics to build a SAP simulator? The other thread is detailed but the pics are all defunct.

3 - Or, perhaps there's a way to flash Z3 Euro firmware instead? There's a thread on that, but I didn't see a way to install the 2.8L firmware.

spidertri 01-14-2018 09:41 PM

1) Battery to the hatch and install the SAP where it would be in a 328.

2) SAP simulator, you can buy them already made or make one yourself. e36-electronic.com

3. Swap tune can turn off anything you don't want turned on. I went with markert motorworks and have been very happy with their tune, lots of other great tuners out there too.

zachdog 01-15-2018 11:32 PM

Thanks for the advice. I'll look into the simulator option first!


All times are GMT +1. The time now is 06:58 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2018, 318ti.org