e36 front wilwood big brake kit brackets 5 Attachment(s) I made some brackets for wilwood superlite calipers. I've run them on my race car for a couple of years. I had some extras made for some friend's cars. I still have some. I decided to make them into kits. The brackets are hot rolled steel. There are no washers or spacers needed like the other obvious seller of wilwood brake kits. These are made to work with E46 M3 front rotors (325mm). I had the brackets electroless nickel plated for corrosion resistance. I added the bracket bolts, brake line adapters, and some loctite to complete the kit. I have some for non-M spindles and M3 spindles. I can also purchase and send you calipers if you don't want to purchase them yourselves. For that matter, I can purchase rotors and pads if you really want. So, here are the options: Wilwood caliper bracket kit: $210 Bracket kit and calipers: $530 Bracket kit, calipers, centric premium rotors, and Wilwood BP-20 pads: $760 That includes shipping anywhere in the lower 48 states. Let me know if you have any questions! |
Interested. Lemme Talk to my dad first haha. |
Does this fit on a BMW e36 325 coupe? En do you send to the Netherlands, i pay in advantage. Regards, Roy |
Quote:
I'd prefer not to ship internationally. |
I'm open to offers as I want to clean out the basement! |
Whats the lowest you will go |
Quote:
|
Quote:
|
Bump! I lowered the price! |
Hey, I'd possibly be interested in a set or three of your brackets...I was curious which Willwood Calipers both your front and rear sets use. I'd honestly be interested in buying a full set for my soon to be swapped 5-Lug E30 with E36 M3 Fronts and Ti Rears, as well as a set of fronts for my E36 M3. So I'd like to know what kind of package deal you could possibly do for me. Also, will the Ti rears work with the E36 M? wasn't sure how compatible the brakes are. Shoot me an email to reardona - at - gmail - dot - com. Thanks, -Adam |
I'm interested if u have any left, I know this is an old post but its worth a shot right? |
Yes I still have a kit or two for Non-M and M3 spindles. Let me know what you want and we can work something out. Thanks, Paul |
Do you have any kit let running M3 spindles |
All times are GMT +1. The time now is 04:50 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org