WTB: Long Block M44
 

Its been a while since I've been on this site. My 98 Ti recently took a bite. I thought it was the head gasket when the oil and coolant mixed together, but after having a shop take the head off, they found a large crack in my engine block :( I'm looking for a long block to replace my current blown engine. Preferable:
Low Miles
Good Compression
Somewhere in the North East

I have a flat bed that I can drive to pick it up, but I'm not trying to go any further then ~500 miles from 14450

Id offer mine, but im not too sure about one of the other cylinders. I did a compression test before pulling the engine, for a 2.5L I6, all were near or above 160, the engine was COLD, and i think one of the cylinders were washed out due to a no start....didnt have a MAF sensor and wouldnt start nor fire up for me after running it a couple days without it. I can post pics, mileage, compression numbers, and a decent price if interested. I also have 2 BLOCKS here, one with 80k on it, no head, and another with a missing piston and rod, 200k on it though.

still looking

bump, had a few offers but nothing has paned out so far...