M44 Engine Parts For Sale is the original M44 out of my 332ti. This engine is blown, and has a hole in the engine block and oil pan. While I'd love to sell it in one piece, I'd like to offer its bit here. If there is anything that you see that you need, please let me know and I'll be happy to work a deal. I can pull of anything big or small and ship it your way. If its not within the picture, check my garage sale auction. I don't have it if you don't see it. The engine was pulled and set aside complete. Nothing has been removed at this point, and it looks just as you see it below. The floodgates are open. http://i220.photobucket.com/albums/d...e/IMG_2067.jpg http://i220.photobucket.com/albums/d...e/IMG_2070.jpg PENDING ITEMS: SOLD ITEMS: Oil Filter Cap Upper Timing Chain Cover Cam Sensor Cam Sensor Wheel Intake Bellows Ping Sensors Intake Manifold (Both Upper & Lower) Exhaust Manifold Valve Cover |
I'd be interested in the following bits, if you have them available: ASC control cable / morse cable with plastic threaded instert (my insert is shredded, but it's part of that entire cable assembly) charcoal cannister mounts -- the mounts with the rubber anti-vibration sections in the middle Upper Airbox lid if it has no cracks Valve cover if you're willing to part with it Let me know what you're willing to part with. tbw |
If it didnt get hot and the head is not warped. Im interested in the cylinder head. I installed a rebuilt in my 97 ti beacause the other blew the coolant pipe on the rear and warped the head. I want to rebuild and tweek that one for a DASC. Please let me know if its good and how much. Thanks |
Do you have the cap that seals in the oil filter? If so how much do you want for it? |
Quote:
The other parts you mentioned are not listed as part of this sale. Lucky for you, they are over here: http://www.318ti.org/forum/showthread.php?t=21288 I'm willing to separate the SAP mounting ring from the unit - $10 Air box top has no cracks - $20 Quote:
Complete Head (minus valve cover) - $120 Quote:
|
|
Quote:
The post-ASC boot isn't cracked at all. $15 shipped for both. Let me know. (Also replied at gmail account) |
Oil Filter Cap Sent! Still an entire engines worth of parts here. |
How much for the front timing cover (the piece the cam senor mounts into), camshaft sensor and the pickup wheel (bolted onto the end of the cam behind the cam sensor) on the cam. Thanks, Steve |
do u have any body panels, interior parts for sale? |
i Quote:
|
If the valve cover is still available next week when I get paid I'll take it. |
Quote:
|
Quote:
|
Quote:
|
All times are GMT +1. The time now is 06:51 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org