318ti.org forum - TOUCAN Cai

318ti.org forum (http://www.318ti.org/forum/index.php)

- Air Filters/Intakes (http://www.318ti.org/forum/forumdisplay.php?f=8)

- - TOUCAN Cai (http://www.318ti.org/forum/showthread.php?t=4271)

DaNO	01-22-2005 08:58 PM

TOUCAN Cai

So i got a toucan CAI and i dont know where to put the temp. sensor, does anyone else have this CAI, if so , where did you put it.

schussey

01-23-2005 01:29 AM

toucan as in dinan style?

http://www.motorworkswest.com/galler...g_cold_air.jpg

ZeroG

01-23-2005 01:40 AM

Problem solved ...

Quote:

Originally Posted by DaNO

So i got a toucan CAI and i dont know where to put the temp. sensor, does anyone else have this CAI, if so , where did you put it.

The DASC came with a K & N filter with a tiny hole drilled in the bottom, for the temp sensor to be placed.

-Chad

barische

01-23-2005 02:07 AM

toucan dont have opening for temp sensor i suppose. well u have to make the opening by urself. good luck. if u return it get cosmo racing cai that is so much better.

DaNO	01-23-2005 07:02 AM

So.................if i were to drill a hole, where would it be drilled. and what would i use to seal it?

ZeroG

01-23-2005 09:39 AM

Anwhere B 4 the throttle body...

Quote:

Originally Posted by DaNO

So.................if i were to drill a hole, where would it be drilled. and what would i use to seal it?

You can seal it with slyacone or not at all the chance that you are going to lose air is low and the little air that you are going to take in that will bypass the filter will be tiny. I would put the whole in the filter just so I don't ruin the down tube.

-Chad

All times are GMT +1. The time now is 01:08 AM.