Front Plate Mount. I ordered the wrong front plate mount from pelican http://www.pelicanparts.com/cgi-bin/...%20318ti%09%20 I forgot the the M-Tech Bumper would be different. This looks to be the right part. Can anyone confirm? http://www.pelicanparts.com/cgi-bin/...C%20Each%20%20 It looks like the standard molding piece but with two holes in it to access the threaded screw holes underneath. Is this correct? If so can I just drill out the part I have? Then if I ever end up back in a state w/o front plates I can just order the a new standard molding without holes. Any info would be appreciated. Thanks |
http://www.bavauto.com/fland.asp?par...3%20FTLP%20KIT this is what you need, those two holes aren't spaced correctly for a plate, they're just for the bracket. you could always just put a couple self tapping screws in to the molding, it's how I have my euro plate on |
Quote:
|
All times are GMT +1. The time now is 09:16 PM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org