318ti.org forum (http://www.318ti.org/forum/index.php)
-   US and North America (http://www.318ti.org/forum/forumdisplay.php?f=13)
-   -   CA Engine block and parts for sale (http://www.318ti.org/forum/showthread.php?t=32243)

318ti-redu 12-03-2010 06:49 AM

Engine block and parts for sale
 
UPDATE: This post is old and not relevant. I started separate post with up to date parts with part#s. Please take a look at that one for latest items available. Thanks.

Hey all -

Was able to sell a couple of things on here last time and also a couple of other things on ebay. What didn't sell on ebay is back here for those who might need these parts now. Anyway, below is the list. All these were in working order when pulled from a 1996. If you have questions, shoot me a PM. Thanks.

BTW - If you need only one side or part of an item I might be able to sell separately.

-Engine block
-Pistons+rods
-Crankshaft
-Engine mounting brackets (L+R)
-Timing case+covers
-Belt tensioner
-Adjusting pulley
-Engine ping sensors
-Intake manifold (U+L)
-Cylinder head camshafts
-Thermostat housing w/thermostat (1yr. old)
-Fuel rail w/injectors + fuel lines
-Timing chain, sprockets, guides
-Throttle housing assembly
-Oil dipstick guide tube
-Ignition coil with wires
-Engine wiring harness
-Water pump (less than 5 years old)

bbarnumboy 12-04-2010 10:54 AM

Lower intake manifold shipped to 98204 :-) i assume the m44 manifold u have will still bolt up fine to a m42? anyways quote for part and shipping please, i am starting a new project.

318ti-redu 12-05-2010 04:39 AM

bbarnumboy: Checking out realoem.com, looks like the lower intake manifolds are different config. between 44 and 42. You may want to do a little more homework to see if you can make a 44 fit into a 42. Maybe someone on here has already done it.

As far as the manifold itself, it is in great shape.

318ti-redu 12-05-2010 04:45 AM

Starter, alternator, oil filter housing are sold. Thanks Jdester!

bbarnumboy 12-06-2010 10:28 AM

how much shipped to 98204? i am using the manifold for an itb installation so i will be modifying it so the whole system in the back of it will not be needed. pretty certain the head flange on the intake is the same from m42-m44 which is what i need it for.

if it doesn't work, my lost but i am certain it will work.

thanks in advance

318ti-redu 12-07-2010 05:07 AM

bbarumboy: I'll look for a box and take it to UPS to have it weighed. Did you want UPS or USPS or ?? When I have a price for UPS and USPS I'll PM you and you can decide which way you want to do it.

bbarnumboy 12-07-2010 10:02 AM

ok, well what is you asking price for the part?

318ti-redu 12-07-2010 07:32 PM

bbarnumboy: PM sent.

318ti-redu 12-12-2010 04:50 PM

Bump!

eurohb 12-26-2010 11:28 AM

belt tensioner ?

318ti-redu 12-27-2010 07:48 PM

Eurohb -

PM sent.

318ti-redu 01-14-2011 07:56 AM

Doing the bump!

grebmohr 01-25-2011 06:05 AM

Hi first time poster but I have a bucket that needs parts... First is the drivers side, upper lift bracket. (pivoting thingy) so I can renew the cylinders to keep hood off my head. Do you still have the hood parts?

318ti-redu 01-26-2011 07:15 AM

Grebmohr -

First off, welcome. Secondly, I only have items from the engine bay available as listed. So no, I don't have the pivot thingy for the hood. Sorry.

318ti-redu 01-26-2011 07:19 AM

The items listed for sale are now up on ebay for the last time. Whatever doesn't sell and is metal will find new life as scrap. The rest will probably be donated to a junk yard or trashed. If anyone wants to do a trade, I'm willing to listen to offers.

Thanks all.


All times are GMT +1. The time now is 08:53 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org