318ti.org forum (http://www.318ti.org/forum/index.php)
-   Parting out & Parts (US) (http://www.318ti.org/forum/forumdisplay.php?f=103)
-   -   Parting Out Ti finally died so parts need to go. (http://www.318ti.org/forum/showthread.php?t=40992)

Aether tuning 12-14-2014 05:26 PM

Ti finally died so parts need to go.
 
I have a 95 black TI sport that I am going to be parting out. The only parts that aren't for sale is the bare doors, engine, trans and driveline along with suspension. Everything else needs to go. Including the ECU which has been reprogrammed with a small tune and had the security bypassed on it.
Let me know what you want and I will get a price to you

Clarification: Just clarifying some parts the may be covered under what I want to keep that I am actually selling.
I am willing to sell the forged oem pistons and rings, connecting rods, cams, most of the valve train, oem tuned intake manifold and throttle body, mafs + tube adapter, oem drive shaft and almost brand new axles, front coilovers and rear coils and shocks (rear shocks probably not worth anything and rear coils have been cut in two places by previous owner) if there are any parts you want to know if ill sell just ask, worst i can say is no

Parts already sold listed below (will keep it updated as parts sell)
Moonroof and small related parts

BlackBMWs 12-14-2014 05:43 PM

If bare doors mean the M side trim strips are available, I'll take those please.


Sent from my iPhone using Tapatalk

Aether tuning 12-14-2014 05:45 PM

Not M just sport
 
Has the thick door trim not the thinner Mtech style. But yes that is a available.

BlackBMWs 12-14-2014 05:48 PM

Ah, thanks! I'm looking for the M tech style. I'm running Mtech on one side, Active on the other. Would pick up a whole set, but really just need the passenger side.

Did you have a Moonroof conversion, glass top and internal slider? If so, I'd be interested in knowing more.


Sent from my iPhone using Tapatalk

BlackBMWs 12-14-2014 05:49 PM

Ti finally died so parts need to go.
 
Oh, sorry, just realized its on the sold already list. My bad.

But was it the class top? I wondered about this as a conversion.


Sent from my iPhone using Tapatalk

Aether tuning 12-14-2014 05:52 PM

It was the regular non see through oem moonroof.

Earl 12-15-2014 11:43 AM

What condition is the quarter glass on both sides? I am looking for a set with no cracking on the rubber.

What shape are the hood struts and bracket in?

What color interior? I am looking for a rear parcel shelf (cargo cover) in very good shape.

joe1602 12-15-2014 01:26 PM

How much for the antenna (whole unit from the trunk plus antenna) shipped to 14845? Thanks!

Aether tuning 12-15-2014 06:41 PM

Rear side glass panels are in great condition, good struts are good. As for brackets are you talking about how they mount? Black/gray interior cargo shelf destroyed.
Antenna unit is broken. I had a random antenna on it for a while but the hatch caught it and ripped the screw part right off the unit.

Earl 12-15-2014 06:51 PM

Is the rubber cracking at all on the quarter glass where they meet the door jam?

Earl 12-15-2014 06:52 PM

Bracket would be the portion that is bolted to the hood=)

joe1602 12-15-2014 07:14 PM

I basically had the same thing happen. Thanks anyway & Good Luck!

Aether tuning 12-15-2014 08:30 PM

Thanks joe. Earl the brackets are good. And the driver side back windows rubber is missing about 2-4 inches at the very bottom. That part that hangs off in the door.http://tapatalk.imageshack.com/v2/14...b3cc65f60f.jpghttp://tapatalk.imageshack.com/v2/14...4208835bc7.jpg
Theres a few pics. If you want more just ask.

ketchup 12-16-2014 05:39 AM

interested in the front door cards & the rear sections as well, if you still have them.

Earl 12-16-2014 09:42 AM

Darn. Looking for a "perfect" pair. Any pictures of the hood struts?

Aether tuning 12-16-2014 11:12 AM

Yea still have both door panels but no back panels. Didnt have them when i got it.
http://tapatalk.imageshack.com/v2/14...d059d53fc2.jpg thats what they both look like.
I do not have the door latch cover for the driver side and the actual handle is broken but i do still have it.

Aether tuning 12-16-2014 11:49 PM

http://tapatalk.imageshack.com/v2/14...da803cdc32.jpghttp://tapatalk.imageshack.com/v2/14...4532e02f87.jpg

Earl 12-16-2014 11:53 PM

No rust or anything on them from what I see. How much for them with brackets and clips?

ketchup 12-17-2014 01:16 AM

Quote:

Originally Posted by Aether tuning (Post 368929)
Yea still have both door panels but no back panels. Didnt have them when i got it.
http://tapatalk.imageshack.com/v2/14...d059d53fc2.jpg thats what they both look like.
I do not have the door latch cover for the driver side and the actual handle is broken but i do still have it.

Ok, i see. How much for the fronts then – shipped to 68112? Don't need the speakers really, but if its easier for to just keep them intact, thats okay by me. Thx.

Aether tuning 12-21-2014 03:24 AM

http://tapatalk.imageshack.com/v2/14...699ba28b2c.jpg

Heres a pic of the freshly pulled ecu

Aether tuning 12-22-2014 03:46 AM

Not sure if it notifies people or not. But I've updated the main post

Aether tuning 12-22-2014 03:57 AM

Also to anyone interested I do have an Eaton M90 series 3 super charger that I am rebuilding right now to sell.

roadblkx 01-09-2015 06:48 PM

Are your car's front grill's silver or black? How much would you want for them?

Aether tuning 01-09-2015 09:51 PM

Black with silver surround i can change color for sale if you want.

roadblkx 01-09-2015 10:08 PM

I was looking for a matte black set of kidney grilles for mine. If they are silver, was thinking I could turn it into a DIY project with spray paint but I am on the fence on whether I want to do it or not. How much would you want for them?

This is what I am looking for:
https://encrypted-tbn3.gstatic.com/i...IUlkZvxUrvWh6Q

Aether tuning 01-09-2015 10:23 PM

Yea the center of mine are black but the surround is chrome. Its two pieces. I can professionally paint them if you wanted. Thats part of my business.

Aether tuning 01-10-2015 03:59 AM

Ok to all that are following this still. Turns out i have an m44 not the m42 model. So as said above still selling cams valves and pistons. Keeping the connecting rods. I am selling the two piece drive shaft with the carrier bearing and the two rubber flex mounts. New axles are also up for sale. Had them on the car for less then a week before she died. My custom painted alloy wheels are up for grabs as are 3 more of the same style and one other one. Ill post pics of them soon. The oem intake and throttle body are ready to go if someone wants them i don't plan to use them. The ac compressor as well. Front coilovers are decent and rear springs and shocks are shot. The rear trailing arms plus axle support are not going to be used and need to go.
Any questions just ask

eurohb 01-15-2015 06:46 PM

Heater core for sale..?

Aether tuning 01-15-2015 06:59 PM

Yep

eurohb 01-15-2015 07:10 PM

Any leaks and is the car m42 or m44?

Aether tuning 01-15-2015 07:18 PM

No leaks and technically its both....

eurohb 01-15-2015 07:55 PM

Quote:

Originally Posted by Aether tuning (Post 369693)
No leaks and technically its both....

PM me price shipped to 91773 the core and piping. I need a heater again :/

Ralliart10 01-15-2015 10:55 PM

How much for the exterior drive side door handle?

Aether tuning 01-23-2015 05:00 PM

Send me a pic of what your wanted exactly and ill look Ralliart10

Ralliart10 02-02-2015 08:38 AM

It looks like this :cool:

http://www.ebay.com/itm/BMW-M3-E36-3...d7e0be&vxp=mtr


All times are GMT +1. The time now is 03:54 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org