Injector recomendations?
 

Its time to replace my injectors. Any recomendations? Maybe something to boost performance?


Sent from my iPhone using Tapatalk

Anyone know how many cc's the stock injectors are in the M44?


Sent from my iPhone using Tapatalk

Injectors aren’t really a wear item. They do need gaskets but that’s a simple rebuild. You can get them flow tested as well if they’re out and cleaned. Basically a machine that run detergents through and makes sure they are within spec.

Stock injectors are 19lbs. Unless you’re FI or running a built motor there isn’t a reason to change to a larger injector. If you are VAC sells adapter to run the Bosch style from the 6s. Obviously not just a plug-in play as you’d need supporting software mods.


Sent from my iPhone using Tapatalk Pro

Software mods :O. I found some 42lbs 440CC's, cant plug n play? Gunna be more complicated than i thought.


Sent from my iPhone using Tapatalk

No you cannot place in higher flow injectors. The ECU needs to be tuned for the injectors. Besides being that high they are for FI motors. BMW did just about as much as they could to pull power from the M44. There aren’t many inexpensive mods that gain you much power.

What are you trying to do?


Sent from my iPhone using Tapatalk Pro

****. Hahaha gain power...


Sent from my iPhone using Tapatalk

I heard platinum or iridium spark plugs are good for performance too, but im not sure which is better.


Sent from my iPhone using Tapatalk

You could make a few gains, first just making sure engine is tuned up. CAI kits don’t do much but add sound, just make sure filter is a stock replacement. Lightweight flywheels do help in in terms of feeling so you may want to look into that. Could also change rear differential to a 393/410 to sacrifice highway mpg. A cat back sounds nice and may add a few. Supersprint was my favorite in M44. Midnight Tuning on here does tunes that will pull a few hp for higher octane fuel.

If you wanted to go full build on the M44 Metric Mechanic makes motors but that will be 5-10K. There might be a few BMW Motorsport shops around you which could offer advice in running a higher comp motor, etc. But that’s getting a motor built which isn’t cheap.


Sent from my iPhone using Tapatalk Pro

Yeah I figured as much. These M44's are to whimpy. Im going the midnight tuning route pretty soon. But if I can gain like another 5hp somehow would be nice. I have looked into underdrive pulleys, and found a nice looking kit. Might be getting that soon too.


Sent from my iPhone using Tapatalk

With supporting mods you could get 5 real hp. Which pulley kit are you looking at.


Sent from my iPhone using Tapatalk Pro

I think its the ECS kit


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/201...3dd02cdd90.jpg


Sent from my iPhone using Tapatalk

So midnights reflash adds 18hp, and Id still like another +5 on top of that.


Sent from my iPhone using Tapatalk

I don’t think that pulley kit fits the M44. Midnight tune is good but I am skeptical it adds 18hp. Are there dyno sheets? Is that without supporting mods?


Sent from my iPhone using Tapatalk Pro

https://uploads.tapatalk-cdn.com/201...51f6733bc9.jpg


I found this kit too. Im not sure if he has dyno results. But I've heard others speak very highly of his work and they say its well worth it. His post doesnt mention additional mods, just a plug and play ECU reflash, and 91 fuel required.


Sent from my iPhone using Tapatalk

I just checked Midnights site as well. I’ve heard highly of his work for many years here and even if not 18 I would grab. Pulley kits do work. There are some larger throttle bodies for the M44 still floating around on used sites but I don’t think they offer much. Are you already running a different exhaust?

If you do get the tune and pulley it would be interesting to see what yours makes on the dyno.


Sent from my iPhone using Tapatalk Pro

I have a magnaflow 14816 and a res delete. Thats about it. I fully intend to proceed with the mid flash and the Underdrive kit


Sent from my iPhone using Tapatalk

Awesome. Hopefully you can get on dyno to see what it’ll make. This thread has got
me looking at high comp M44
threads now.


Sent from my iPhone using Tapatalk Pro

Me too, im reading an old one about a turbo kit specialized for M44's


Sent from my iPhone using Tapatalk

https://m.ebay.com/itm/T3-T3-T4-T04E...MAAOSwMmBV5327


Found this FI kit. Not sure of the quality, but the price is insane. I remember an original ti.org member named JohnBoy praising a kit by this maker. Not sure if this is the same kit. But looks tempting. Only problem is besides the manifold, turbo, and intercooler piping, i have no idea how to install the rest.


Sent from my iPhone using Tapatalk

I bet quality is low-medium and it's still kind of expensive for a manifold, meh turbo and some pipes. You could probably piece together a much better system yourself and if you can weld even better. The issues are you'll need a tune (expensive) injectors (expensive) possible fuel pump upgrade, etc. I've spent almost more on supporting mods for my basic S52 then the motor itself. Having an unbalanced car may sound fun but it's not. Especially if you want to use it. The stock M44 also doesn't can't take that much boost. Built ones can.

Yeah soo true. I really only like like 8-7 lbs of boost. Not too much and i think unbuily it could take it.


Sent from my iPhone using Tapatalk