318ti.org forum (http://www.318ti.org/forum/index.php)
-   Parting out & Parts (US) (http://www.318ti.org/forum/forumdisplay.php?f=103)
-   -   Misc parts (CA) Running 1996 M44, 5-sp trans, diff, etc. (http://www.318ti.org/forum/showthread.php?t=38351)

Strawman 04-26-2013 12:52 AM

(CA) Running 1996 M44, 5-sp trans, diff, etc.
 
***UPDATE on 8-11-13***
Engine, trans and all related equipment sold. Still have the cat-back exhaust, differential, axles and suspension pieces. Hurry up on this stuff before it hits the recycling bin...


I just updated my suspension (H&R Sports, Konis, Meyle HD LCAs, Powerflex bushings, tie-rods, etc.) and installed an E28 3.25 LSD differential. I am now in the final preparation stages for my M52/ZF swap. So I've got a bunch of stuff to sell from my June 1996 BMW 318ti. I have receipts for all new parts from Pelican Parts and/or my local BMW dealer. If you hurry (next couple of weeks), you can drive the car to feel how well everything works.

The M44 engine has 195k miles, and has run perfectly for the 25k miles I have owned it over the last 15 months. I installed new NGK plugs, wires, waterpump, radiator, hoses, plastic coolant pipes, and ALL o-rings/seals when I bought it. There are no leaks or untoward noises, and I have driven it all over the Left Coast without any problems. I have receipts from the previous owner showing he used synthetics, as have I since I've owned it. I'll throw in the ECU, engine harness, K&N panel filter, intake tract and exhaust manifold for $400. I'll need a weekend to remove it, and I can use my cherry picker to load it into your pickup/trailer.

I'm also selling the Getrag 250 5-speed transmission, including a new BMW Guibo and new Meyle trans mounts (both 25k miles ago). The trans was replaced by the previous owner at 165k miles with a good used one that had 120k miles; RedLine synthetics in the box since it was replaced. The clutch was replaced at 165k miles, and it shifts/holds fine without any noises. I'll sell the whole shooting match for $200 (I'll remove the trans when I do my swap).

I also have the open/non-LSD 3.46 small-case differential and axles for sale. The axle boots are in great shape, and there are no untoward noises or other damage. I'll sell all of this for $100 or best offer.

For those looking for something truly unique, I've got a 5-lug drum brake rear suspension setup, including trailing arms. The trailing arm bushings appear to be in good shape and worked fine before I swapped it out last weekend. Why drums, you ask? My car came out of Italy; I've also got the Italian owner's manual that I'll throw in. The rear brake setup is noticeably lighter than the disk brake setup that I replaced it with... you can have the whole setup for $50.

Finally, I've got the two front spindles, backing plates, and non-vented brake calipers that I'll sell for $25 (for everything). No leaks and the pads have plenty of life -- but the disks look a little thin (I haven't mic'd it to be sure). I swapped in the front setup from the 328i that grabbed the engine from, so I'm practically giving this away.

I'm not looking to make a mint here, and I really don't want to ship these heavy items. Please help me clear out my garage and jump-start my engine swap! All items are OBO, and are located in beautiful San Luis Obispo. Make a vacation out of it when you pick up this stuff (package deal offers are welcome).

Geoff

Artem 04-26-2013 01:05 AM

Hey did you have an aftermarket exhaust on the car by any chance? If so would you want to sell that to me?


Cheers,
Artem

Strawman 04-26-2013 05:21 PM

Nope, just the stock exhaust (in great condition!).

Quickcars 04-26-2013 06:15 PM

conversion
 
what other parts would I need in order to do the conversion on my auto and how much would you charge to ship to N.Y.?

Paul

Strawman 04-28-2013 04:22 AM

Quote:

Originally Posted by Quickcars (Post 348424)
what other parts would I need in order to do the conversion on my auto and how much would you charge to ship to N.Y.?

Paul

There are plenty of threads on this site about auto-to-manual swaps. I'm only selling some of the required parts (you'd need pedals, clutch master cylinder, etc.). Good luck with your project!

Artem 04-28-2013 04:39 AM

Ah gotcha. Well, good luck with the sale!



Quote:

Originally Posted by Strawman (Post 348422)
Nope, just the stock exhaust (in great condition!).


wodcutr 05-07-2013 05:35 AM

I need that tranny and clutch. Would you be willing to ship it to me in Utah

Strawman 05-10-2013 04:21 AM

Just PM'd you; I'd rather not ship. I plan to do the M52/ZF swap in early June and I'll have to see how much energy I have at that time (I'm old!). In the meantime, if you find one locally jump on it.

Geoff

Quote:

Originally Posted by wodcutr (Post 348965)
I need that tranny and clutch. Would you be willing to ship it to me in Utah


benz-tech 05-15-2013 05:13 AM

PM sent.

lostinspacebar 05-16-2013 03:25 AM

Can't PM, yet. Would you be willing to sell just the axles for $50? I live in MD.

You can contact me at adityagaddam [ at ] gmail

Thanks,
Aditya

benz-tech 05-17-2013 04:35 PM

Wait. You're in SLO and have a Ti. What are the chances that you are the guy I bought 2 white e30 doors from a while back?

Strawman 07-28-2013 07:24 PM

2 Attachment(s)
Wow, has it really been over two months since I posted this? The engine/trans are now out of the car and ready to go into your car. I prefer not to ship any of this stuff and that you come to San Luis Obispo to pick these items up.

It should be noted that I recently got a Check Engine light, P011 Air Intake Temperature Sensor. However, I took videos of the engine running and accelerating to show no problems with the car.

Strawman 07-30-2013 07:56 AM

Videos of the engine & on the road...


http://youtu.be/xDLUN8dJ6CE

http://youtu.be/doOY73XFJnw

http://youtu.be/CiGTuuuxX9I

Strawman 08-10-2013 12:58 AM

Accepted an offer for the engine/trans and all related equipment, took a deposit and delivering tomorrow in Sacramento. Other parts still available for CHEAP!!!

Strawman 08-12-2013 04:21 AM

Engine/trans sold to benz-tech. He's swapping the Getrag 250 trans into his 1991 E30 318i to get better gear spacing, and then building a crazy 2.0 liter from the M44 I sold him -- bore the block to use S52 pistons (milled down to get an acceptable compression ratio). He's not sure he can use the DME and all related stuff I provided, but he's going to try. I can't wait to hear how his project progresses!


All times are GMT +1. The time now is 03:43 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org