318ti.org forum (http://www.318ti.org/forum/index.php)
-   Engine Swaps (http://www.318ti.org/forum/forumdisplay.php?f=26)
-   -   What harness for M52 swap from Z3 (http://www.318ti.org/forum/showthread.php?t=44620)

Motts 05-15-2019 10:30 PM

What harness for M52 swap from Z3
 
So the junkyard M52 I got is from a Z3 (production 8-14-98) but the engine electrical harness was chopped (boo).
I’m trying to figure out the best harness option for putting this engine into my ti. The Z3 OEM harness is a different part # than 328.
Does anyone know what the difference in harnesses is? My gut instinct is to get a Z3 harness and make it work in my chassis.
Any suggestions?



Sent from my iPhone using Tapatalk

Motts 05-15-2019 11:20 PM

I think I figured it out. According to J!M, sounds like the 328 harness is a better option. I'm heading in this direction unless I hear otherwise.

http://www.318ti.org/forum/showthread.php?t=17135

BRADESTAR 05-16-2019 02:13 AM

Yes 328 is cleaner. The Alternator on Z3 will be different, best to get an M3 alt and the cooling gear to go to it.


All times are GMT +1. The time now is 06:06 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org