318ti.org forum (http://www.318ti.org/forum/index.php)
-   Parting out & Parts (US) (http://www.318ti.org/forum/forumdisplay.php?f=103)
-   -   all years 318ti parts (http://www.318ti.org/forum/showthread.php?t=44864)

cordobaTI 07-29-2020 04:15 PM

Quote:

Originally Posted by Mark96CaliRoof (Post 391848)
I’m looking into doing a auto to manual swap, so need transmission, drive shaft and other parts. Where are your located?
Thanks,

im in zip code 18428, i do have manual swaps available but they come and go very fast, most customers drop off with me and i do the install, reseal trans, new fluids etc. currently im swamped with work until september but if you'd like to inquire you can pm me, i can help you find the swap and we work out date/price for me to install if needed, my prices are unbeatable and i don't cut corners.

cordobaTI 07-29-2020 04:18 PM

Quote:

Originally Posted by SmokedBMW23 (Post 391850)
Do you have a radio/climate control trim? The part that holds it into the dash.

Also a radiator cover, sunroof button cover panel in black, rear parcel cover in black(preferably). And a windshield washer cowl with no cracks or breaks?

Sent from my SM-G955U1 using Tapatalk

climate trim i have yes, radiator cover are you asking for the plastic piece above it or the fan shroud? winshield washer cowels i do have that aren't broken, rear parcels i dont think i have a spare, all of mine are black but sunfaded basically grey, i use sems color coat black vinyl paint to restore them on my last ti, has lasted 6 years and you still couldn't tell the difference. I may have one extra but it would have the common broken tab, lmk if that interests you and just pm me an offer

NMSDAD1 07-31-2020 11:57 PM

I am looking for a Boston green drivers side front fender.

dudecati 08-06-2020 08:58 PM

Bits that connect hat shelf to hatch
 
Small request but I am looking for the string bits and the bases that connect the hat shelf to the hatch. My car has them but the 'clips' that attach them to the hatch are both broken, have made it work but it doesn't look very nice. Do you happen to have them?

Spartan 059 08-18-2020 03:51 PM

Quote:

Originally Posted by cordobaTI (Post 391988)
i have a dark mtech set if thats what you're inquiring about?


yes that is, you have the front pair?

two30grain 08-20-2020 05:26 AM

Any small case LSD's by chance?

Sent from my HD1925 using Tapatalk

Spartan 059 08-20-2020 05:33 AM

not to high jack his thread, choose his first lol,, but I have a 3.15 torsen style medium case diff, that fits in our cars if you'd be interested, the mediums you should preferably swap to e30 half shafts though so if that extra work isn't worth it to you I understand

two30grain 08-20-2020 03:32 PM

I appreciate it and keep it in mind but I'd prefer not to go that route at the moment. Thanks!

Sent from my HD1925 using Tapatalk

ink3pointoh 08-20-2020 08:48 PM

Looking for rear coil springs for a 98 w MTech suspension if you have those or know of a replacement that's similar to OEM.

cordobaTI 08-26-2020 03:35 PM

i have a couple fenders but not boston green

Quote:

Originally Posted by NMSDAD1 (Post 391996)
I am looking for a Boston green drivers side front fender.


cordobaTI 08-26-2020 03:36 PM

i have a full mtech with oem mtech suspension with an original 80k miles on it, i'm about to take it off and put my coilovers on it, send me an offer on what you need (just rear coils?) im located in 18428

Quote:

Originally Posted by ink3pointoh (Post 392064)
Looking for rear coil springs for a 98 w MTech suspension if you have those or know of a replacement that's similar to OEM.


cordobaTI 08-26-2020 03:39 PM

you are correct in saying medium diffs fit in our cars, but also you can use the stock half shafts, i build tis for a living and unless the ti is s50/52 swapped or boosted the ti half shafts work just fine. (heck even my previous track car was s50'd with 272whp and stock ti half shafts, i ripped apart the whole rear end of the car from torque but never broke a ti half shaft YET.)

Quote:

Originally Posted by Spartan 059 (Post 392061)
not to high jack his thread, choose his first lol,, but I have a 3.15 torsen style medium case diff, that fits in our cars if you'd be interested, the mediums you should preferably swap to e30 half shafts though so if that extra work isn't worth it to you I understand


cordobaTI 08-26-2020 03:39 PM

i actually may have one, i need to go check if its an lsd and get back to you, are you local?


Quote:

Originally Posted by two30grain (Post 392060)
Any small case LSD's by chance?

Sent from my HD1925 using Tapatalk


cordobaTI 08-26-2020 03:41 PM

so i still have these, but over the weekend i just picked up a slicktop shell...soo i might end up using those doorcards now, still in the air though


Quote:

Originally Posted by Spartan 059 (Post 392053)
yes that is, you have the front pair?


Spartan 059 08-26-2020 03:56 PM

Quote:

Originally Posted by cordobaTI (Post 392081)
so i still have these, but over the weekend i just picked up a slicktop shell...soo i might end up using those doorcards now, still in the air though

ok, if you happen to decide on selling them let me know


All times are GMT +1. The time now is 01:31 PM.

vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org