Clutch Emergency I'm in the process of replacing my clutch. Can't get the transmission out. It moves 5/8" of an inch & stops. Does the starter have to be removed to pull the transmission?? If I have to remove the intake, I'm burning the car tonight. Stuart |
After exhaustive internet research, I believe the starter is stuck on a dowel on the bell housing. I'll try tapping it out tomorrow. |
Quote:
I had to drop the transmission a little to access the starter torx bolts. Unfortunately I also had to remove the intake to access the starter. |
FIXED IT !! yes, it was stuck on the dowel. I banged it with 2 12" 1/2" extensions & off it popped off. |
All times are GMT +1. The time now is 07:57 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org