so far I've been doing a little research in the best place I seen to get the sc14 supercharger is off of eBay do you have a better source or do you know of a better Source can point me in the right direction I'm interested in going big or going home |
Eaton M45/M62 final drafts done 1 Attachment(s) Hello Everyone, After many days of labor, as of tonight the Eaton M45/M62 based designs final technical drawing whiteprint drafts are complete. Next week it is going to our 3D modeling & CAD team, then the final prototyping. We should be able to release the finals by late August. I will get back to you all at some stage tomorrow. :smile: Far the days come.. |
Do you need a downpayment on one to help the process? :) |
Boy oh boy Can't wait to see this happen And I love the fact that you're trying to keep it at a great price point that way you can get a lot of people involved in purchasing this kit |
Will there be a significant difference between the cost of a kit that uses the bottom half of the manifold for the Eatons vs one that retains the stock manifold fully? |
this is great I was wondering the Same thing too |
Hey again guys, thanks for all your support, So let me get back to the questions. :smile: Quote:
See if you can find the M62 from a Mercedes Kompressor from local yards or part guys, they are plenty usually. Meanwhile, if you cant, we will supply you with a unit to test. Now you are about an hour away from the HMW K.C. workshop in Vineland, NJ. So we will just double check if we have one laying around, if so you can go pick it up from the chief engineer Keith there. :wink: Just be sure to return it afterwards. If you like then drop me a line and we will work it out. Quote:
Quote:
But yes if you like, we could work something out. :wink: But watch out, The other downside is the M90 is slightly larger (40-50cc or so) than the SC14 and about 10% more efficient. You can easily blow up our little M44/M42 with them if you are not careful. Quote:
Quote:
There is also AliExpress - where I suggest anyone looking for the AMR500 grab theirs as they are going at a good rate ($180 shipped) https://www.aliexpress.com/item/32289771813.html There is also the TVS Eaton https://www.aliexpress.com/item/32662649749.html the TVS R410 is around the same size as an AMR500 (~500CC so only good for maybe ~5PSI at most) But more efficient and used in the new Volvo twin charged engine. This should work with our Eaton M62/M90 brackets if adapted, but not yet officially supported just like the M90. That said, if buying the SC14 from Aliexpress, ask for the actual blower's picture so you know the condition. Of if you are really interested let me know and we will work something out. Quote:
Quote:
Quote:
But overall there will be 3 main kits, one for the AMR500, second the SC14, both of them retain the stock manifold. If anyone who bought the AMR500 eventually want to upgrade to the SC14, we will cut down the price half and upgrade them) so that way they dont pay more than its worth. Then the third setup will be for the Eaton M45 & M62, for the eatons we will be using a mini plenum adapter (hence only top half needs to be removed for eatons) Anyone who wishes to try the M45/M62 will get a kit that fits either one of these. ------------------------------ Anyone here have any GM M90's locally? I think they are abundant and if I could make it fit, it could make things easier for a lot of people in the future who want even bigger power although I dont say take the boost any more than 8PSI on a stock motor, specially not without a proper tune. |
Quote:
|
Quote:
Once I have the brackets and do some testing of my own and approve, then we will talk about payment and shipping (late July). But I will try to keep it at $500 -$600 shipped and all just to cover production and shipping. Grab yourself a blower locally (the yards sell the eatons very cheap- just need the right one) and then do a log. That's all I ask.:smile: So, 1 In. I need 2 more testers. Aiming for Late July. Want M44 and M42. :redface: |
Acquiring a blower before then is probably not likely for me :( ill keep an eye out for a good deal however. Sounds like a good time playing with one of these kits Sent from my iPhone using Tapatalk |
Quote:
|
Quote:
Im in, whatever I can do to help. Im sure we can work something out. Sent from my iPhone using Tapatalk |
You've got me tossing up whether to take you up on the offer of testing for you vs my original TC plan :confused: My biggest issue is SC sizing. Ideally I want to run around 350rwhp but with the possibility of turning the wick up to some where around 450rwhp even for just a short time. I will be running an IC, and any other mods needed to support the power. |
Quote:
|
Quote:
|
All times are GMT +1. The time now is 03:11 AM. |
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org